Model & Measure: Hip Roof Framing De-Mystified by Modeling in SketchUp
Previously in Model and Measure:
In Part One of this 3-part Model and Measure series I gave an overview of some important aspects of hip roof framing geometry. To explore that geometry I created a SketchUp model that includes every rafter needed for a complete 7:12 pitch framed hip roof. The challenge of modeling all those piecesparts in SketchUp is not unlike the challenge of cutting and building a hip roof on a real world jobsite. In either case a handful of tricks will make the process manageable and a whole lot quicker. Here in Part Two I demonstrate the tricks I use to create a hip roof framing model.
First Things First:
This first of two videos shows the process I use to model a hip rafter. It’s important to keep in mind that this is modeling on a “Digital Jobsite” where we’re not restricted to the physics of working with real-world jobsite materials. Adapting this mindset speeds up the modeling process by allowing non-conventional techniques for drawing. You’ll (hopefully) see what I mean as you watch a hip rafter materialize by watching this:
Modeling your first hip rafter will take longer than your second one, and with a little practice you’ll be amazed at how quickly it goes.
Now that we have a hip rafter to work with, modeling jack rafters is the next step. With so many lines and faces for each jack rafter (34ea. x 8 jacks = 272 jacks x 8 sets = 2,176 lines and faces total) it would be a daunting task indeed to build this model line by line… UGH!! By using the Move/Copy and Rotate/Copy tools however, we can create 8 jacks with less effort than creating one common rafter and 64 jacks with less effort than creating the first 8. I think it’s fair to say that the effort expended yields exponential results when modeling this way:
Share and Share Alike:
If you want to work with the model created for the Model and Measure series you can download it from the Component Warehouse where it is there to share by clicking HERE. Bryce used the great extension ladder model by smartsizer that I downloaded from the Warehouse to get up on the model roof. Be sure to add a positive comment/rating to smartsizer’s models for lending his ladder to Bryce and sharing it with the SketchUp community!
To Be Continued…
Model and Measure Part Three: Hip Roof Framing De-Mystified by Measuring in SketchUp will be posted in the near future. It will cover the aspect of this process I find most beneficial: measuring modeled parts for layout angles and dimensions. I’ll attempt to show how to gather dimensions from the modeled parts and apply them for actual rafter pattern layout.
Stay tuned for more on this topic and help promote the Digital Jobsite blog by hitting a thumbs/down as you navigate away.
Rafters ready for sheathing
Rafter Ready Hip