Window Head Trim and Drip Cap
Drip with a kick and a dam caps window trim.
The window head-trim design Mike Maines calls for is a 5/4 by 4-in. head piece with a 5/4 by 4-in. cap. We ripped the top edge of the head piece with a 7-deg. bevel so the cap would be slightly sloped to help drain water.
Over the cap we installed aluminum flashing. We formed a slight kick-out along the bottom of the drop leg to stiffen up the flashing and kick water away from the trim piece.
Rather than turn the ends of the flashing down over the ends of the cap trim, we turned up 1/4-in.-high end dams. The end dams help block water from rolling off the ends of the flashing where the siding is notched around the 1-in. cap trim horns. The end dams aren’t noticeable unless you look closely at the windows, so they don’t detract from the window-surround design.