All How-To Topics
MerrickProperties, member
Design or Plan used: My own design
posted in: Project Gallery, finish carpentry, kitchen, cabinets, built-ins
|
|
restaurant bar-back
comments (0) April 13th, 2011 in Project Gallery
MerrickProperties, member
done
This is the area behind the bar at a Northampton restaurant. I used 3/4" oak plywood for its strength and dimensional stability. I made all the cuts in my shop at home and assembled everything on site.
My estimate was a little too low on this job. I neglected to consider how much sanding I'd have to do to reveal the oak under the old brown paint. Working around their business hours was also an obstacle. Regardless, it's something I'm proud of and has already raised interest in my work.
Design or Plan used: My own design
posted in: Project Gallery, finish carpentry, kitchen, cabinets, built-ins
Stay connected with Fine Homebuilding
|
|
Advertise here for as little as $50. Learn how
|
|
See what's happening at
-
How to Paint Fiber-Cement Siding
Painter Jim Lacey shares some tips for caulking and painting fiber-cement siding. read more
|
|
Comments (0)
You must be logged in to post comments. Log in.