All How-To Topics
Fine Homebuilding: The Magazine
|
|
Footing Form On a Roll
comments (1) March 5th, 2009 in Blogs
Robyn Doyon-Aitken, producer
1 user recommends
Photo: Ron Budgell
by Ron Budgell
Fastfoot
| ■ Manufactured by Fab-Form Industries ■ 888-303-3278 ; www.fab-form.com ■ Cost: about 80¢ per linear ft. |
Houses would be much easier to build if all concrete footings were perfect, but perfection is a monster that feeds on man-hours, especially when working with rough-sawn 2x10 lumber that is wet, warped, and covered in old concrete. Still, that didn't stop me from laughing when an architect on my last project recommended that we try Fastfoot, a reinforced sheet-plastic footing form that is unrolled and installed in a light framework. When I stopped to consider that I routinely pour concrete into forms made of foam, Fastfoot no longer seemed so silly.
To get started, I built a light framework with 2x4 top rails supported by stakes spaced 2 ft. to 3 ft. apart. Then I laid the footing fabric into the framework and stapled it to the top edge, folding the plastic neatly to go around corners. After tying the sides of the framework together with 1x4 strapping, I was ready for the pour. Setup took about 20% less time than I had estimated for installing lumber forms, and this was my first time working with the system.
When it came time to pour, I was tense, but that nervousness evaporated about 10 minutes into the pour; nothing moved from where I'd put it. Stripping the form lumber was easy. In fact, except for the top braces and a few stakes, all of the lumber was clean enough to be reused for the house's framing.
Having such success with Fastfoot, I really can't see myself forming footings any other way in the future. This system is faster, better, and less expensive. Who says you can have only two out of three?
—Ron Budgell is a builder in Prospect Bay, N.S., Canada.
posted in: Blogs, additions, foundations, concrete
|
|
|
|
-
How to Paint Fiber-Cement Siding
Painter Jim Lacey shares some tips for caulking and painting fiber-cement siding. read more
|
|
About this Blog
Fine Homebuilding is the largest and most trusted residential construction magazine around. Every issue has the information you need to build better, all written by the “guys who swing the hammers.” In Fine Homebuilding, these experienced pros show you what they’ve learned, and on these pages, you can read the current and past issues.
Other Fine Homebuilding Blogs
Editor's Blog: Better than Plumb The Deans of Green Building Building News: The Daily Scoop Chalk the Line
Comments (1)
Posted: 11:19 am on March 23rd
You must be logged in to post comments. Click here to login.