Pin It

Grabber - SuperDrive 55 Autofeed Screw Gun

This autofeed screw gun from Grabber is intended to be used for drywall, fence building, and subfloors

$278.00 (As of 3/1/2001)

Be the first to review this Tool

View all photos

Overview

User Reviews

Photos

Editor's Review: Survey of Autofeed Screw Guns

by Derek McDonald review date: March 1, 2001

This is a smooth, solidly constructed autofeed screw gun unit that takes 50 screws per load in a floppy-tape collation. During testing, the driver's bit became stuck in the extended position after driving 150 screws, but the jam was easily cleared and did not recur. With a narrow (1-1/4 in. to 2 in.) range of fasteners, the SuperDrive 55 is intended to be used for drywall, fence building, and subfloors.

The kit as tested included the autofeed unit, a Grabber Rocker screw gun (basically a DeWalt 251), a 22-in. extension with side handle, and a carrying case.

Editor Test Results:

Overall Rating

N/A

Manufacturer Specifications

Manufacturer	Grabber
Manufacturer's Web Site	www.grabberman.com
Manufacturer's Phone Number	800-477-8876
Weight	6 lb. 14 oz.
Dimensions	N/A
Feed Style	Strip
Collation	Tape
Screws Per Strip/Coil	50
Screw Capacity	1-1/4 in. to 2 in.
Amps/RPMs	6.3 / 0 to 4,000

Stay connected with Fine Homebuilding

Special Sections

2013 HOUSES Awards

Remodel of the Week by Marvin

Fine Homebuilding’s Remodeling Showcase

Product Finder: Related Products

Bostitch - CST2 Autofeed Screw Gun
This autofeed screw gun system from Stanley-Bostitch is available only as an accessory, so the user has to furnish the screw gun

Makita - 6834 Autofeed Screw Gun
Unlike most other autofeed screw gun systems, the drive motor and autofeed unit on this model from Makita are inseparable

Milwaukee - Sharp-Fire Autofeed Screw Gun
This autofeed screw gun from Milwaukee has an easy tool-free bit-change procedure

Muro - FDVL41 Autofeed Screw Gun
Unlike most other autofeed screw gun systems, the drive motor and autofeed unit on this model from Muro are inseparable