FHB Logo Facebook LinkedIn Email Pinterest Twitter X Instagram Tiktok YouTube Plus Icon Close Icon Navigation Search Icon Navigation Search Icon Arrow Down Icon Video Guide Icon Article Guide Icon Modal Close Icon Guide Search Icon Skip to content
Subscribe
Log In
  • How-To
  • Design
  • Tools & Materials
  • Restoration
  • Videos
  • Blogs
  • Forum
  • Magazine
  • Members
  • FHB House
  • Podcast
Log In
Building Business

Concern Over EPA’s Proposed New Lead-Safe Rule

By Richard Defendorf

Even though full enforcement of the Environmental Protection Agency’s lead-safe rules for renovations and repairs has been in place for almost a year, many contractors are still grappling with how to remain competitive while following the rules, according to an online survey conducted by the National Association of the Remodeling Industry (NARI).

For those who do continue to work on buildings constructed before 1978 , the cost of compliance with the rules can boost bid prices significantly above those from noncompliant contractors, contractors responding to the survey said. And in comments in mid-May following the EPA’s first enforcement action regarding its lead-safe rules, some contractors worried that once they’ve completed a job on a pre-’78 building, its occupants could decide to sue later on, claiming illness due to lead exposure and contractor negligence. 

 

The survey also fielded reactions to a proposed rule that would require contractors on pre-’78 projects to submit dust-wipe samples – after the work is finished but before the building is reoccupied – that would be tested for lead levels, adding an estimated $100 to $500 to the overall job cost. A recent Wall Street Journal story about the survey noted that, among its almost 1,500 respondents, 74% do not normally conduct dust-wipe sampling, while 26% say they do.

 

A hedge against future claims?  

The majority of respondents said the added cost of dust-wipe testing would further encourage homeowners to do the repair or renovation work themselves or to hire noncompliant contractors to do it, thereby increasing the risk of occupant exposure to lead. It also could be argued, however, that tests verifying that lead and lead-dust levels are below hazardous thresholds might help defuse occupant complaints based on claims of lead exposure.

 

No question, compliance for some jobs could get expensive, because, as the EPA explains, “for a subset of jobs involving demolition or removal of plaster through destructive means or the disturbance of paint using machines designed to remove paint through high-speed operation, such as power sanders or abrasive blasters, this proposal would also require the renovation firm to demonstrate, through dust wipe testing, that dust-lead levels remaining in the work area are below regulatory levels.”

 

In describing the proposed new rule’s potential benefits, the EPA said it would “benefit 809,000 children under the age of 6 and 7,547,000 individuals age 6 and older (including 96,000 pregnant women) per year by minimizing their exposure to lead dust generated by renovations.” The EPA estimates annual compliance costs will range from $272 million to $336 million, depending on the lead-level threshold the agency adopts for dust-wipe results. 

 

The comment period on the proposed rule ended July 6, 2010, and a final ruling is expected on July 15, so it remains to be seen whether documented compliance with the proposed new rule would give contractors a short-term headache but also, in a few cases, longer-term peace of mind.  

 

Fine Homebuilding Recommended Products

Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.

8067 All-Weather Flashing Tape

Available in 2- to 12-in. widths, this is a good general-purpose flashing tape that sticks well to most things. It features a two-piece release paper, water-shedding layers, and good UV resistance.
Buy at Amazon

Handy Heat Gun

This heat gun is great for drying joint compound, primer and paint when patching drywall and plaster walls. Plus it can soften adhesive, get a very cold small engine to start, and shrink heat-shrink tubing.
Buy at Amazon

Reliable Crimp Connectors

These reliable, high-quality connectors from Wirefy work on 10-22-gauge wire have heat-shrink insulation to keep out water and road salt.
Buy at Amazon

Sign up for eletters today and get the latest how-to from Fine Homebuilding, plus special offers.

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters
See all newsletters

×

Get home building tips, offers, and expert advice in your inbox

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters
See all newsletters

New Feature

Fine Homebuilding Forums

Ask questions, offer advice, and share your work

View Comments

  1. amazingrace | Jun 26, 2011 07:04pm | #1

    The post work dust wipe test will not" prevent" a client from suing a contractor. Nothing will "prevent" a lawsuit from being filed. I don't understand how this brings peace of mind to a contractor. The contractor will still be dragged into court, guilty before proven innocent. He/she will still need to be represented to prove that all and I do mean all of the requirements was followed. It is still left to the judge or jury to decide the outcome.
    This is just another hoop for the contractor to jump though. Another item that can be analyzed by the suits to find a mistake. If anything, this gives a false sense of security ,but in the end, it's the contractor who is held responsible. I hope that this doesn't go into affect. But, like I mentioned before, I am out of the pre 78's. And for those of you that choose to be in, God bless you, and prosper.

  2. renosteinke | Jun 26, 2011 08:55pm | #2

    The flaws in the new rules are many, and this article hits on the biggest one: the new rules virtually guarantee that there will no longer be a 'legitimate' industry.

    Instead, homeowners will have a very real incentive to go fishing in the day-labor pool, rent a pressure washer, and be done with it.

    Let's look at ordinary preparation for a moment. Here's the choice: pay $80 for the Wagner paint-eater (non-complaint) or $800 for the Paint Shaver PLUS another $800 for a (certified) Fein vacuum. You can't even continue to use the $40 Shop-Vac with its' $13 HEPA bag - measures you took on your own initiative years before these rules - because they're not EPA certified. (One has to wonder just how much difference there is between an $80 HEPA vac and another $800 vac; to my eye, nothing that a 3" piece of duct tape won't address. (tape to close off the filled bag).

    I'm in the midst of a complete-gut remodel of a house that was built before 1978. By the time I'm done, little of the original will be left but the frame and the face brick. Yet, it will still be a pre-1978 house, and the rules will still apply. Likewise, the rules make it much more difficult to live in the house while it is remodeled in stages.

    The rules need to be removed, in their entirety, and the EPA needs to be reigned in.

  3. Harbisonrepair | Jun 27, 2011 04:56am | #3

    I'm still waiting for someone from the EPA to explain how you are supposed to erect the outdoor barriers that are required when the adjacent houses are less than 10 - 15 feet apart? Not to mention being surrounded by shrubs and trees. I feel sorry for the owners of pre 78's. In my area (NC Triad) there are several neighbor hoods like this, all pre 70's. Barely enough room to put up a ten foot barrier much less an additional ten foot buffer. Any thought from those who have run into this and have complied with the EPA guidelines?

  4. mark122 | Jun 28, 2011 07:27am | #4

    I live in Chattanooga, Tn. bid a project on a home that falls under the EPA's regulations for lead dust control and was out bid. I was very convinced I bid the job fairly and competitively so when I heard back from the HO that they had decided to go with someone else I was surprised. (surprised because I am a one man show that does very little subbing out so I know my cost are low) I was in the area of town a few weeks later and decided to drive by and see who had outbid me.
    Exterior scraping, interior demo going on and not a SINGLE sign of compliance, or an attempt to comply. I email the local (or closest) EPA office and this was the reply I received: (i reported the address the work was preformed on)

    Thank you for taking the time to report this, but unfortunately there is
    not sufficient information for us to take action on this complaint. We
    need the name and address of the contractor in order to pursue
    enforcement.

    Elizabeth Wilde
    Regional Lead Coordinator
    Air, Pesticides & Toxics Management Division
    U.S. Environmental Protection Agency
    Region 4, Atlanta GA
    Phone: 404 562-8998
    email: [email protected]

    so this confirmed my gut feeling that these regulations are just another way this over grown government has found to dip a little further in my pocket.

  5. amazingrace | Jun 28, 2011 08:27am | #5

    I am all for working clean and cautious. I have always vacuumed during and after the project is completed. I didn't need for it to become a law. To be punished with a fine and potentially put out of business for not filling out a form or leaving a paint chip under a radiator or something. It is very frustrating to work and to keep compliant. I am trying to understand the whole punishment side of the regulation. I understand that with breaking of a law that there is punishment. But, where does the money go ? Most contractors that I know of are small 1-10 man operations. A $37,000. fine will put them out of business. So whats the point ? Does that money go back into the community, does it create jobs for the local people ? How does fining a company help?
    There was a county near by that was fined 1.2 mil by the epa for a sewage problem a few years back. Today that same county is nearly bankrupt, the problem still persist and the epa has 1.2 mil. This has to stop. This doesn't make any sense. It is doing more harm then good. It may look good on paper, and the "intentions" are meaningful and understood. But, the repercussions are just now coming in view. And it does not look good for the local contractors or home owners.

  6. ramblingroad | Jul 04, 2011 06:47am | #6

    No one ever mentions the repercussions of all that plastic that is now destined for our landfills. Wrap the house, 1000 square feet per side and a cost of at least $100+ for the sheeting. Take a lunch break, pack it all up and then wrap it again when you return. Do it all again until the prep is completed. That's a lot of plastic and a lot of added expense.

  7. nhertel | Jul 04, 2011 07:09am | #7

    Is there anyone in the country still considering re-electing this three-ring circus of an administration next year?

  8. coopertoo | Jul 04, 2011 11:00am | #8

    after taking the 8-hour lead-safe renovator class recently, I decided that it would be prudent to have my own blood lead level checked, given the fact that I have worked on pre-1978 houses for the past 34 years without rubbers gloves or N-100 respirators or shoe covers or tyvek suits or worksites completely bathed in plastic sheeting or lead-rated vacuums.
    I am 53 years old, and my Blood Lead Level is negative. so low that the test does not detect any Lead in my bloodstream. I have lived and worked in North Carolina, upstate New York, Maine, and Wisconsin during the past 34 years...you would think that I would have some lead in my body that could be detected by a blood test! My understanding of lead is that it doesn't go away on its own, that your body can't rid itself of heavy metal contamination.
    I'm now thinking that we should ask the homeowners to submit themselves for pre-renovation and post-renovation blood tests to protect ourselves from future lawsuits....

  9. HandyBill | Jul 05, 2011 06:14pm | #9

    We went to the classes, paid our license fee, trained our techs and to what end? The customers will not pay the cost of the lead containment. We have since gotten out of interior work when there is lead present and containment is required. It is time for all of us small guys to get together and just plain refuse to do the work if there is lead. The only way to get this silliness out of the system is to have a lot of homeowners complain to the media and the Feds that contractors refuse to work on their homes. I see no other way to protest or fight it until the EPA is disbanded (don't hold your breath). Passive resistance is all we have left.

  10. Criterionlabs | Jul 13, 2011 04:09pm | #10

    Just to clarify: the dust sampling wipes, in the wording of the changes contained in the relevant federal register, indicate submiting to a dust wipe test, with the inferrence being that a Dust Sampling Technician, Lead Inspector or Risk Assessor administer the test. There is no indication that this wipe test can be administered by the Certified Renovator and the wipes submitted.
    FYI- the testing for lead on the wipes is performed by a method called Flame Atomic Absorbtion; in this the wipes, collected by a technician under strict formats, are chemically digested and then analyzed by flame to detect and quantify heavy metals.
    So, I think it may be misleading to think that contractors will be sending wipes in baggies to labs.

Log in or create an account to post a comment.

Sign up Log in

Become a member and get full access to FineHomebuilding.com

More Building Business

View All
  • Pros of Apprenticeship Programs
  • Hiring Entry-Level Employees
  • From Craft to Company: Starting Your Own Business
  • Best Practices for Home-Building Project Communication
View All

Up Next

Video Shorts

Featured Story

FHB Podcast Segment: Patching Drywall Near a Shower

Learn how to patch drywall above a fiberglass shower without totally redoing everything.

Featured Video

Builder’s Advocate: An Interview With Viewrail

Learn more about affordable, modern floating stairs, from design to manufacturing to installation.

Related Stories

  • Podcast Episode 685: Patching Drywall, Adding Air Barriers, and Rotted Walls
  • Podcast Episode 684: Masonry Heaters, Whole-House Ventilation, and Porch Flooring
  • Podcast Episode 683: Barndominiums, ERVs, and Radon Mitigation
  • Podcast Episode 682: Basement Flooring, Architectural Salvage, and HVAC Ducts

Discussion Forum

Recent Posts and Replies

  • |
  • |
  • |
  • |
  • |
  • |
View More Create Post

Highlights

Fine Homebuilding All Access
Fine Homebuilding Podcast
Tool Tech
Plus, get an extra 20% off with code GIFT20

"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.

Get home building tips, offers, and expert advice in your inbox

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters
See all newsletters

Video

View All Videos
  • Podcast Episode 678: Live from the Builders' Show-Part 2
  • Podcast Episode 677: Live from the Builders' Show-Part 1
  • FHB Podcast Segment: The Best of the Fine Homebuilding Podcast, Volume 8
  • FHB Podcast Segment: Larsen-Truss Retrofit to Existing Stud-Frame House
View All

Fine Homebuilding Magazine

  • Issue 331 - June 2025
    • A More Resilient Roof
    • Tool Test: You Need a Drywall Sander
    • Ducted vs. Ductless Heat Pumps
  • Issue 330 - April/May 2025
    • Deck Details for Durability
    • FAQs on HPWHs
    • 10 Tips for a Long-Lasting Paint Job
  • Issue 329 - Feb/Mar 2025
    • Smart Foundation for a Small Addition
    • A Kominka Comes West
    • Making Small Kitchens Work
  • Issue 328 - Dec/Jan 2024
    • How a Pro Replaces Columns
    • Passive House 3.0
    • Tool Test: Compact Line Lasers
  • Issue 327 - November 2024
    • Repairing Damaged Walls and Ceilings
    • Plumbing Protection
    • Talking Shop

Fine Home Building

Newsletter Sign-up

  • Fine Homebuilding

    Home building tips, offers, and expert advice in your inbox.

  • Green Building Advisor

    Building science and energy efficiency advice, plus special offers, in your inbox.

  • Old House Journal

    Repair, renovation, and restoration tips, plus special offers, in your inbox.

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters

Follow

  • Fine Homebuilding

    Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.

    Start Free Trial Now
    • Facebook
    • Instagram
    • X
    • LinkedIn
  • GBA Prime

    Get instant access to the latest developments in green building, research, and reports from the field.

    Start Free Trial Now
    • Facebook
    • YouTube
  • Old House Journal

    Learn how to restore, repair, update, and decorate your home.

    Subscribe Now
    • Facebook
    • Instagram
    • X
  • Fine Homebuilding

    Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.

    Start Free Trial Now
    • Facebook
    • Instagram
    • X
    • LinkedIn
  • GBA Prime

    Get instant access to the latest developments in green building, research, and reports from the field.

    Start Free Trial Now
    • Facebook
    • YouTube
  • Old House Journal

    Learn how to restore, repair, update, and decorate your home.

    Subscribe Now
    • Facebook
    • Instagram
    • X

Membership & Magazine

  • Online Archive
  • Start Free Trial
  • Magazine Subscription
  • Magazine Renewal
  • Gift a Subscription
  • Customer Support
  • Privacy Preferences
  • About
  • Contact
  • Advertise
  • Careers
  • Terms of Use
  • Site Map
  • Do not sell or share my information
  • Privacy Policy
  • Accessibility
  • California Privacy Rights

© 2025 Active Interest Media. All rights reserved.

Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.

X
X
This is a dialog window which overlays the main content of the page. The modal window is a 'site map' of the most critical areas of the site. Pressing the Escape (ESC) button will close the modal and bring you back to where you were on the page.

Main Menu

  • How-To
  • Design
  • Tools & Materials
  • Video
  • Blogs
  • Forum
  • Project Guides
  • Reader Projects
  • Magazine
  • Members
  • FHB House

Podcasts

  • FHB Podcast
  • ProTalk

Webinars

  • Upcoming and On-Demand

Podcasts

  • FHB Podcast
  • ProTalk

Webinars

  • Upcoming and On-Demand

Popular Topics

  • Kitchens
  • Business
  • Bedrooms
  • Roofs
  • Architecture and Design
  • Green Building
  • Decks
  • Framing
  • Safety
  • Remodeling
  • Bathrooms
  • Windows
  • Tilework
  • Ceilings
  • HVAC

Magazine

  • Current Issue
  • Past Issues
  • Magazine Index
  • Subscribe
  • Online Archive
  • Author Guidelines

All Access

  • Member Home
  • Start Free Trial
  • Gift Membership

Online Learning

  • Courses
  • Project Guides
  • Reader Projects
  • Podcast

More

  • FHB Ambassadors
  • FHB House
  • Customer Support

Account

  • Log In
  • Join

Newsletter

Get home building tips, offers, and expert advice in your inbox

Signing you up...

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
See all newsletters
See all newsletters

Follow

  • X
  • YouTube
  • instagram
  • facebook
  • pinterest
  • Tiktok

Join All Access

Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.

Start Your Free Trial

Subscribe

FHB Magazine

Start your subscription today and save up to 70%

Subscribe

We hope you’ve enjoyed your free articles. To keep reading, become a member today.

Get complete site access to expert advice, how-to videos, Code Check, and more, plus the print magazine.

Start your FREE trial

Already a member? Log in