It’s critical that the slab be as flat and clean as possible before the flooring is glued down. In this episode, Kevin Ward uses a ten-ft. straightedge to find the high and low spots in the floor, then grinds the high spots down and fills the low areas with a concrete-based compound.
With the right approach, you can restore old hardware—whether through soaking, scrubbing, or polishing—giving it a fresh look while preserving its original charm.
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial NowGet instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
