The Complete Guide to Caulk
Joint design and prep may matter even more than choosing the right product.
Synopsis: Caulk and sealant joints are rarely taken seriously or done correctly in residential construction. This article covers proper joint design and prep as well as product selection.
After researching and writing this article, I had an epiphany: In 35 years of doing and writing about residential construction, I have never seen a caulk joint executed properly. Most residential caulk joints I’ve seen have failed or are likely to. Builders, including myself, barely know which caulk or sealant to use where, and hardly anyone in residential construction knows how to execute a proper joint by considering crack width and depth and the use of backer rod or bond-breaker tape. There is a lot to know.
The first thing to know is that building components move. Builders don’t like to acknowledge this. This may be because it feels like a reflection on their work, or because it introduces complexities in material choices and procedures they’d rather avoid, or just because it never occurred to them. Movement happens mostly because of changes in temperature and humidity. We see the results in gaps between materials. In some instances, such as with interior trim, this is only an aesthetic issue. But in other cases — the corners of a shower, the gaps around a window, expansion joints in concrete — such spaces can lead to serious effects by allowing unwanted air or water to enter. The solution isn’t necessarily to make tighter joints, but rather to design the joints for the realities of the environment and the material, and then to install a good sealant properly.
I’m not arguing against good workmanship. The best caulk ever made still can’t make a badly executed interior-trim joint look good, for example. But good workmanship sometimes means leaving a gap that’s sized to allow a proper…