Prep a Subfloor for Tile
A second layer of plywood stiffens floors for long-lasting tile installations.
Synopsis: This article covers the basics of installing plywood underlayment for use below ceramic tile. It discusses subfloor preparation, panel layout, and fastener spacing.
As a carpenter, I installed thousands of square feet of plywood underlayment over subflooring that the framers had fastened to the floor joists. Plywood underlayment can be used directly under tile in many instances, and it might still be necessary even if you’re using cementboard or one of the plastic isolation underlayment systems. For example, many isolation systems require the use of plywood underlayment with joists on 24-in. centers. These products make great tile bases, but they don’t strengthen floors like plywood does. Plywood underlayment helps to share loads between joists, reducing the overall deflection of the floor, and it reinforces the subflooring to stiffen the floor system between the joists. This is important because ceramic tile is pretty inflexible, and movement in the floor below it can cause cracking.
There are three primary sources for correct underlayment details available online, but they don’t agree on all points, and some of the details might seem counter-intuitive. (For example, underlayment should not be fastened into joists.) When in doubt, consult with the tile manufacturer, who’s the one responsible for deciding whether or not to honor warranty claims. For dry areas, or with the use of a water-proofing membrane, the Tile Council of North America’s (TCNA) 2015 Handbook for Ceramic, Glass, and Stone Tile Installation lists plywood rated either Exposure 1 or Exterior as a suitable base for floor tile in residential use, with the caveat that it be installed according to details from a different source: ANSI standard A108.01. Another source for information on wood floors is Ceramic Tile Over Wood Structural Panel Floors from APA – The Engineered Wood Association.
The TCNA handbook references…