Replies

1. 
   McDesign | Oct 26, 2008 01:39am | #1

   Okay - here's up top.  Before anybody blames my Seal-O-Flex, this was done by the original roofers we hired back in 1992.  I was supposed to re-top-coat it every five years or so, and I just didn't . . .

   I've outlined the squashy areas with sharpie -
   View Image

   View Image

   The whole expanse is about 16x22'.  House is square; main roof is hipped in a "U".  this fills in the center back -
   View Image

   Forrest

   
   

   ---

   Edited 10/25/2008 6:42 pm ET by McDesign
1. 
   McDesign | Oct 26, 2008 01:44am | #2

   Cut out all the bad area coverage with a knife and peeled off the fabris; CDX underneath -

   View Image

   Back below, I'm draining the insulation through the poly VB before I pull it out, to decrease the yick factor -View Image

   Forrest - hope it doesn't rain for a while

   Edited 10/25/2008 6:46 pm ET by McDesign
1. 
   Shep | Oct 26, 2008 03:32am | #4

   Just when you thought you were almost finished with the house...

   but now that you're "only " working 4 days a week, you'll have plenty of time to fix the roof, patch the ceiling, paint, etc. LOL

1. 
   McDesign | Oct 26, 2008 03:35am | #6

   And I was mostly painting the front of the house today!  

   I think I'm gonna skip the Octoberfest and pumpkin-carving party tomorrow and catch up.

   Forrest - wanted to redo that plain bathroom anyway

1. 
   Shep | Oct 26, 2008 03:56am | #7

   I bet you wish you're back in last year's drought again <G>

2. 
   McDesign | Oct 27, 2008 02:59am | #8

   Yep!

   Got it all cut out and re-decked today - misssed the Octoberfest, but made my boss's boss's pumpkin-carving party.

   Here's all the 15-year-old 3/4" CDX cut out in squares down to the old 1x -View Image

   Ooogey detail - rafters are still okay - Poured on the MinWax wood consolidant just as a precaution -View Image

   New 3/4" screwed down -View Image

   I use Bondo to  fill the cracks; not as an adhesive, but as a non-shrinking gap filler - will sand later -View Image

   Ready to sand and smooth; will pick up seal-O-Flex at 6 AM tomorrow -View Image

   Forrest

   Edited 10/26/2008 8:06 pm ET by McDesign

3. 
   Shep | Oct 27, 2008 03:17am | #9

   Ya know-

   except for that skylight in the middle of it, that flat roof looks like a pretty nice place to sit and watch the stars

4. 
   McDesign | Oct 27, 2008 03:27am | #10

   Right, but that big skylight is over our big shower with three shower heads, AKA "the Rumpus Room".

   Can see stars from there, too.  Even a moon.

   Forrest

5. 
   Shep | Oct 27, 2008 04:36am | #11

   " even a moon"

   yeah, but is that from looking up, or down?

    

    

   C'mon, you had to be expecting that one. LOL

6. 
   AbbieHoffman | Oct 27, 2008 07:14am | #12

   I think I'm gonna skip the Octoberfest and pumpkin-carving party tomorrow and catch up.

   http://www.cubpack81.com/images/carve_pumpkin.swf "Revolution is not something fixed in ideology, nor is it something fashioned to a particular decade. It is a perpetual process embedded in the human spirit". abbie

   "Give them what they want" abbie

2. 
   Hudson Valley Carpenter | Oct 26, 2008 02:17am | #3

   I was supposed to re-top-coat it every five years or so, and I just didn't . . .

   Congrats!  You should now fully appreciate the significance of one hand clapping.

   ;-)

    

1. 
   stevent1 | Oct 26, 2008 03:34am | #5

   Forrest,

   May I echo a revered client. "That is the charm and beauty of an old house"

   We came home once from a Key West escape and found the sunroom ceiling on the floor. We were having a roofer do a reroof and the counter flashing was not done correctly.

   Chuck Slive, work, build, ...better with wood

3. 
   JohnT8 | Oct 27, 2008 07:37pm | #13

   I was supposed to re-top-coat it every five years or so, and I just didn't . . .

   Shoemaker's kids going without shoes again.

   ;)

    jt8

1. 
   McDesign | Oct 27, 2008 07:51pm | #14

   No longer!

   Forrest - now merely an inspired dilettante

1. 
   dcarroll3000 | Oct 30, 2008 12:55am | #15

   Do you have to pull a new Seal o Flex membrane across the roof or is there a way to

   patch in the spots and cover with seal?

   -d

1. 
   McDesign | Oct 30, 2008 02:36am | #16

   Hey - good question.  Monday night, I rolled on the pink embedding compound, consistancy like mayonaise, covered it with some fiberglas mat I had for the car, and then rolled over it again with the roller to get it well saturated. 

   Just now (Wednesday night), I rolled on the white top coat goop - more like thick paint.  It's waterproof now, but this weekend I'll wash the rest of this deck and recoat it all like I was SUPPOSED to do 5-10 years ago.

   View Image

   Forrest

   Edited 10/29/2008 7:37 pm ET by McDesign