Replies

1. 
   Guest_ | Sep 22, 1999 05:24am | #8

   *
   Anybody got a source for 2" wide quater sawn white oak tape?

   Ed. Williams

1. 
   Guest_ | Sep 16, 1999 08:22am | #1

   *Geez, can you get any edge tape that wide? - jb

1. 
   Guest_ | Sep 16, 1999 09:35am | #2

   *jb, I'd ask Ed Williams. I bet he'd know where to get it.

1. 
   Guest_ | Sep 16, 1999 07:14pm | #3

   *In my area (Southeast Texas) it is available at Lowe's (GOD I hate that place). It is available in 3/4", 1 1/2", 3", 6", 12", and 24". You could get the 3" and trim it after applying. I don't have a brand name in front of me, and they keep changing suppliers anyway. If they don't have it in stock, they could probably order it. A mail order company called Leichtung carries the stuff also. I don't have a book in front of me. Maybe someone else can give phone # or address.James

1. 
   Guest_ | Sep 17, 1999 07:32am | #4

   *jb,Yeah, we can locally get mahogany, plain sawn oak, ash, birch, etc., most of the common woods in 2" tape.But no quarter sawn white oak. In the past we have used veneer and stich witch. But I was hoping to find it commercially produced.I'll keep looking.Ed. Williams

2. 
   Guest_ | Sep 17, 1999 07:36am | #5

   *James,Lowes? Iron on quarter sawn white oak tape? Really? I didn't think those guys knew what quarter sawn means. I got one right down the street from me on Inwood Road. Thanks, I'll check it out.Ed. Williams

3. 
   bullet | Sep 19, 1999 05:47am | #6

   *if it's manufactured, these people would know where you can get it:http://www.hpva.org/

4. 
   Guest_ | Sep 19, 1999 09:19am | #7

   *Hi GACC,In my area (Pittsburgh, Pa) our local lumber yard stocks a product called BAND-IT. I buy it in rolls of 2 inch wide X 8 feet long for $7.50 What I buy is quarter sawn Red Oak, but I believe they also make this product in White Oak. Looking at the roll here in front of me, all it says is that this product is American Made by the Cloverdale Company. It does not list an address or phone # with this message. Kinda strange, huh? Well, anyway, maybe the boys at your local lumber yard have heard of this brand or perhaps someone else can find you a phone # to go along with this name. This stuff is real hardwood veneer that irons on. I've had good results with it. Good luck in your search,Davo

5. 
   Guest_ | Sep 22, 1999 05:24am | #9

   *OK....here we go...Edge band heaven....with or without glue back......Almost any species up to 3" wide.....Found them in my own backyard.....Central Edge Banding Co.Ft. Worth, Texas(800) 736-0997They are getting me a 250' roll of glue back iron-on edge banding 2" wide in riff sawn white oak for get this...$52.00 plus change... delivered to my door.However, they did not have the English sycamore that I needed. Oh well.God I love Texas.Ed. Williams