*
Well, I grow more and more disillusioned with the yellow stuff. (I hear ya AJ) I seem to have problems with the blade in my saw wanting to cut bevels even when I set it up for a nice perpendicular cut. I was looking at the bosch models and am thinking of getting the top handle one as I’ve never used a barrel model and would hate to cough up the bucks on something I’m not sure I’d like from the get go. Do you guys have any input? how’s the tool less blade change seem to do and moreover can I use my existing stock of blades? waiting to hear from ya’ll
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
The Portascanner uses ultrasonic technology to isolate the smallest air leaks, making it easier to air-seal an enclosure.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
*
Well, I grow more and more disillusioned with the yellow stuff. (I hear ya AJ) I seem to have problems with the blade in my saw wanting to cut bevels even when I set it up for a nice perpendicular cut. I was looking at the bosch models and am thinking of getting the top handle one as I've never used a barrel model and would hate to cough up the bucks on something I'm not sure I'd like from the get go. Do you guys have any input? how's the tool less blade change seem to do and moreover can I use my existing stock of blades? waiting to hear from ya'll