Pics of our church remodeling + icynene

I’ve bugged a lot of folks about insulation issues since starting our old church remodel. We’ve made a bit of progress, so I thought I’d share. We pulled all the plaster, lath and nailers from our ceiling, and exposed our scissor-trussed roof in the sanctuary. We’re turning it into a hot-roof, with the eaves totally sealed. All the inside roof sheathing is covered in icynene. We’re going to go back soon and use t&g pine planks as the interior veneer to cover the insulation and create our “new” ceiling right below the insulation, leaving all the trusses exposed below. We’ll also be exposing some brick (exactly how much is still being debated with the missus).
Pics of the starting point:
http://www.eyepulp.net/photo/viewSection.asp?sectionID=100224
Pics of truss details:
http://www.eyepulp.net/photo/viewSection.asp?sectionID=100217
Pics of the partial and fully sprayed sheathing:
http://www.eyepulp.net/photo/viewSection.asp?sectionID=100216
Pics of exposing the bricks:
http://www.eyepulp.net/photo/viewSection.asp?sectionID=100218
Pics of the model for the finished church:
http://www.eyepulp.net/photo/viewSection.asp?sectionID=100219
Sorry for the pic overload. I just noticed it’s nice when people show some updates and photos on occasion. =)
My kingdom for more tools
Replies
No need to be sorry for posting those pics. It's how we get a serious portion of ideas.
thanks.
A great place for Information, Comraderie, and a sucker punch.
Remodeling Contractor just outside the Glass City.
http://www.quittintime.com/
That is looking great. Thanks for the update. You're leaving the brick walls exposed, right?
Is this going to be a single family home when you're done?
zak
"When we build, let us think that we build forever. Let it not be for present delight nor for present use alone." --John Ruskin
"so it goes"
Eye
I'm impressed!
I see you been busy! I remember when you first posted about the church and its always good to see updates.
Keep the pic's comming as progress moves forward.
BTW, I think you might be a little fixated on that dead mouse though, get a little more sleep, that should help.
Doug
Heh - I took a few too many shots of the former tenant. The mouse was in one of the little cubby holes you can see on the brick walls.Maybe someone can enlighten me as to the purpose of theses cubby holes: missing bricks every 6-8 feet along certain courses? It certainly seems intentional, but I can't figure out the point.Here's a shot with three of the gaps showing:
http://www.eyepulp.net/photo/viewImage.asp?imageID=103803Much of the brick will remain exposed in the sanctuary, and our heating costs will suffer mightily. We'll also be removing 2/3 of the working floor you see in most of those pics - there's another 10ft below to reach the actual sanctuary floor. I am considering a short (3-4ft tall) knee wall around the edge walls to provide a shelf, some insulation, and a bit of buffer to keep the worst of the cold brick away from people. I might even consider some radiant heating if I can keep it from leeching back into the brick behind it...Oh, if anyone's bored enough and can run an MPG video file (38 megs I'm afraid - you might want to do a right-click "save as" to your desktop before trying to play it), here's some of the plaster and lath removal in action. I stress again the phrase "BORED ENOUGH."http://www.eyepulp.net/photo/misc/bricktimelapse.mpg--------------------------
My kingdom for more tools
I dont know what the voids would be for.
How thick is your walls? I have an old brick house where the walls are approx 18" thick and there isnt any cold air passing through them. Actually its pretty cheap to heat. I plan to finish off some room up in the attic area and leave the brick exposed like you are doing, adds a lot of charm.
Doug
From working on many old buildings/churches where
I used to live, the holes in the brick or stone work
were support holes for wooden timber scaffolding.
Ah -- those holes would make sense at those heights... We should probably expect to find more then when we tear out the floor that's currently dividing the sanctuary in half, vertically. That make a lot of sense though.My wife and I are trying to figure out a nifty way to use them. It'd be neat to recess lights in them, but the wiring would be very tough to hide... unless we ran it along mortar lines.McDesign: I had a great restored 3rd floor loft apartment before this church, and really really didn't want to jump into home ownership. The only building I found before this church that got me excited was an old power plant in town, scheduled for demolition:
http://www.eyepulp.net/photo/viewSection.asp?sectionID=100084The church however, was *much* more affordable. Maybe I'll get the powerplant some other time... =) Glad you like the pics though.--------------------------
My kingdom for more tools
Thanks for posting these pics - I'm going through them slowly!
As a kid, I always wanted to live in a church - thought the architecture was always the nicest in a town.
Forrest