I am working with a client on a master bath remodel. She has a jetted tub in good condition but the jets, air intake, control switch, etc. are worn (and brass) and she wants to swap them out for a new finish. There are no manufacturer markings so I have no source to talk too. Does anyone know of a supplier of these specialty products?
Thanks for your help…
The code requires installing an approved material to slow the spread of fire between floors and adjacent vertical and horizontal cavities — here are the allowed materials and required locations.
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial NowGet instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
You can check with some local plumbing supply houses and see if they have any options.
Or you can check the yellow pages for Metal Plating and have them replated.