The tool crib catalog has a Bosch 7/8″ SDS rotary hammer for $219
I need to drill a buch of holes and don’t have one.
They have a 3/4″ for $179 but I don’t think it has a chisel mode.
Decisions, decisions?
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Fine Homebuilding's editorial director has some fun news to share.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
I saw that in the Tool Crib catalog. I think that if you look more closely, you can get the 7/8 for an even lower price -- but it won't include the set of bits, and maybe some other accessory.
But even the $219 is tempting.
Use code TCCAT4XXJAN4 for $25 off purchase of $199 or more at tool crib. Do not buy one without the chisel mode unless you are absolutely, positively, double dog sure you will never use that function. I just cut a three foot door through 8" cmu's with my two Bosch's. You can drive ground rods and all kinds of neat things with the hammer only mode. Harbor freight and ebay can get you all the sds plus bits you will ever need for very little $.