I have a 12 x 12 deck. The front carrying beam is double 2x12s sitting on 4 6×6 posts, 3 feet apart, 4 feet from grade. I want to build a shed roof to span the deck with an 18 inch overhang. Using 2×8 rafters, can I use double 2×6 for a header?
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
The Portascanner uses ultrasonic technology to isolate the smallest air leaks, making it easier to air-seal an enclosure.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
Maybe. There's not enough information to say. What's your local snow load? At least as important a question as that is whether your deck footings are sized to carry the additional load from the roof.