Replies

1. 
   GUNN308 | Jul 01, 2003 04:30am | #1

   I can get 6,8,10,&12s for my paslode in hot dipped galvies & stainless clipped head although stainless is a wait from my local yard I paid about $65.00 for 2500 8D ring in stainless to be used with cedar these were generic by Grip Rite. 4D nails are only 1 1/4"are you sure?

1. 
   steveworks | Jul 01, 2003 05:25am | #5

   Is this for the pasload framing or finish gun, which model?

   Thanks

1. 
   GUNN308 | Jul 02, 2003 06:37am | #13

   These are for my framing guns , I have an Impulse and a 350S.

2. 
   xMikeSmith | Jul 01, 2003 04:54am | #2

   my Bostich N63  & N64 both can shoot up to an 8d SS ring nail... full head .. about the same as a box nail..

    bostich makes SS nails for it...

   Mike Smith   Rhode Island : Design / Build / Repair / Restore

1. 
   steveworks | Jul 01, 2003 05:23am | #4

   are the heads on these smaller than the usual “framing nail” I’m unfamiliar with the Bostitch line. Are the N63/64 framing guns?

   Thanks

1. 
   xMikeSmith | Jul 01, 2003 05:31am | #6

   n63  /  n64 are sidewall coil nail guns...

   the nails have a typically smaller head  ( like a box nail ) so you can use them for clapboards... but they also make great trim guns..

    here's the N64 with a coil of SS 5dMike Smith   Rhode Island : Design / Build / Repair / Restore

1. 
   steveworks | Jul 01, 2003 05:38am | #7

   Thanks, this makes total sense! Just got to find them now!

   SG

2. 
   mass | Jul 01, 2003 02:01pm | #8

   in massachusetts we line up the butts.

1. 
   xMikeSmith | Jul 01, 2003 11:34pm | #10

   you want the long story or the short one ?Mike Smith   Rhode Island : Design / Build / Repair / Restore

2. 
   mass | Jul 02, 2003 02:44am | #11

   I was kiddin it looked great. but their was a reason,right?

3. 
   xMikeSmith | Jul 02, 2003 05:23am | #12

   the house was shingled years ago..

    it was recently jacked and new steel beams and a new foundation installed...

    ours is the correct coursing.. meeting the incorrect coursing... i pointed out to the owner we could meet and match the old and no one would ever know.. or we can correct and he can meet us when he reshingles that side  ( which probably means when we reshingle that sideMike Smith   Rhode Island : Design / Build / Repair / Restore

4. 
   GUNN308 | Jul 02, 2003 06:46am | #14

   Ayuh, you knew you would be going back all along. I enjoy your articles, but next time use the same storypole as the last guy.LOL

3. 
   rasconc | Jul 01, 2003 05:21am | #3

   Try McFeelys http://store.yahoo.com/squaredrive/fasteners-nails-for-pneumatic-nailers.html

1. 
   JohnSprung | Jul 01, 2003 08:38pm | #9

   Another good place for stainless is http://www.swansecure.com

   -- J.S.