Has anyone out there had experience on getting tire marks off of a concrete driveway? Will a pressure washer do it?
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
A 1225-sq.-ft. detached ADU uses a sloping lot to its advantage, featuring a split-level entrance and vaulted ceilings.
Featured Video
Video: Build a Fireplace, Brick by BrickHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
A pressure washer would work but you would be really practicing your artistry re blending in very clean concrete with that which has built up some debris film.
The tire marks will all but disappear in about 6-8 months with normal rain.
Eric S.
Power washers give a stripped or zebra appearance when cleaning concrete. Unless you go over and over in different directions, but then the area done sticks out from the rest. And if you do the rest also, you'll be at it for days...
Try the rain suggestion.
Or get one of those floor sweeper type of attachments for the power washer. It has a wand under the cowl that circulates and sprays out from several jets. Gives a nice clean complete appearance to concrete. And takes almost no time.
This thing works great on pavers also.
This is a joke right..........you got me laughing real good!
It's a driveway bro, it's where the tires go!
Eric
I agree completly, It's a driveway........gonna have tire marks.An inch to short. That's the story of my life !
bstcrpntr --- I hope to grow into this name.
While I agree, it's a driveway and tire marks are inevitable... yes a power washer will get rid of them.
Use a fan spray head for more uniformity and power-wash the entire drive. Use a good quality detergent made for concrete with lower pressure. Then rinse with high pressure. Then rinse again.
If you don't want to have as much of a problem the next time... seal the concrete while it is clean. MUCH easier to clean up sealed concrete.
They make an accessory for the power washer ... we call it a spinner. Looks kinda like a rotary sander, or a slightly larger floor buffer. Under the hood are two spinning arms with nozzles, and the contraption keeps the nozzles a fixed height off the pavement. It covers a wide area pretty quickly, and pretty much prevents stripes. Some places will rent them. Takes a pretty good size washer cuz of the water flow requirements.
Whenever you are asked if you can do a job, tell'em "Certainly, I can!" Then get busy and find out how to do it. T. Roosevelt
Thanks for the suggestions! It is a new driveway [last year] and I did seal it last year, so hopefully it will come clean. Thanks again, I appreciate all the input!