previous
  • Shorten a Prehung Door
    Shorten a Prehung Door
  • 7 Trim Carpentry Secrets
    7 Trim Carpentry Secrets
  • Electrical Articles & Videos
    Electrical Articles & Videos
  • Buyer's Guide to Insulation
    Buyer's Guide to Insulation
  • 7 Smart Kitchen Solutions
    7 Smart Kitchen Solutions
  • The Hobbit House and More
    The Hobbit House and More
  • All about Roofing
    All about Roofing
  • Master Carpenter Videos
    Master Carpenter Videos
  • The Passive House Build
    The Passive House Build
  • Deck Design & Construction
    Deck Design & Construction
  • Play the Inspector Game!
    Play the Inspector Game!
  • 9 Concrete Countertops Ideas
    9 Concrete Countertops Ideas
  • Tips & Techniques for Painting
    Tips & Techniques for Painting
  • Energy-Smart Details
    Energy-Smart Details
  • Clever daily tip in your inbox
    Clever daily tip in your inbox
  • Remodeling in Action
    Remodeling in Action
  • How to Install Housewrap Solo
    How to Install Housewrap Solo
  • 7 Small Bathroom Layouts
    7 Small Bathroom Layouts
  • Video: Build a curved step
    Video: Build a curved step
  • Read FHB on Your iPad
    Read FHB on Your iPad
  • 12 Remodeling Secrets
    12 Remodeling Secrets
  • Basement Remodeling Tips
    Basement Remodeling Tips
  • Magazine Departments
    Magazine Departments
next
Pin It
Rigid Mineral Wool Foundation Insulation

Rigid Mineral Wool Foundation Insulation

A fireproof, insect resistant, and able to drain water quickly makes this insulation a strong competitor of XPS

$0.00 (As of 11/12/2009)

> (1 user review) Write a Review

View all photos
Overview

Editor's Review: Rigid mineral wool an alternative to XPS?

review date: November 12, 2009

Most foundations are insulated on the exterior, and the vast majority of those exteriors are insulated with extruded polystyrene (XPS). While XPS is widely available, affordable, moisture resistant, and well insulating (R-5 per in.), it has a few drawbacks. Termites and carpenter ants tunnel through it with impunity, often using it as a protected channel into our homes; sunlight degrades it if it isn’t properly protected above grade; and polystyrene is highly flammable, necessitating the addition of the flame-retardant chemical hexabromocyclododecane (HBCD), which is under scrutiny in the European Union as a persistent, bioaccumulative toxin (also known as a PBT).

A relatively unknown alternative to XPS is rigid mineral wool. Mineral wool is made by melting basalt (an igneous rock) or iron-ore slag and spinning cotton-candy-like fibers held together by a phenolic binder. Because mineral wool is inherently fireproof, flame-retardant additives are not required. Rigid mineral wool insulates to between R-4 and R-4.3 per in. (lower than XPS, but still respectable), is about half the price of XPS, drains water quickly, has good compressive strength, is more resistant to insects than polystyrene, and is not as susceptible  to sunlight as XPS (though a protective coating is still needed).

So what’s the catch? The downside is that rigid mineral-wool foundation insulation is not yet widely stocked in the United States and requires special-ordering, which can increase costs and result in construction delays.

Available from these manufacturers:

www.roxul.com (DrainBoard)
www.iig-llc.com (MinWool)

 

Editor Test Results:

Overall Rating Great product but not widely stocked in the U.S.

Manufacturer Specifications

Weight Varies
Dimensions Varies