I am interested in siding a guest house in copper as “An Artisit’s Copper Clad Studio” in the Oct/Nov 2001 issue of FH. This looks like rolled copper about 18″-24″ wide. Nailed at the top and lapped. What would be the nailing pattern on this project?
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
A standardized approach, quick-to-install hardware, and a simplified design make building custom casework cost-effective.
Featured Video
SawStop's Portable Tablesaw is Bigger and Better Than BeforeHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
Don't know about the nailing but I'd be interested in what sort of material cost you come up with for the copper. I don't believe it could be as cheap as the article made it sound.
That article was discussed quite a bit in the "Feedback on FHB" folder at the old site. I've got no clue as to whether those posts can be retrieved from this mess, but there was a lot of info re copper siding, prices, methods & the "Love it or Hate it" studio. Joe H