Latest on my foam saga. Talked to a Polyurethane sprayer today and he says he uses a thin layer of Poly to seal, followed by wet packed cellulose. Saves money.
But – does it work? have heard nothing from anyone here about such a scheme.
Don
Making mitered head casings is a breeze with this simple system.
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial NowGet instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
Takes about 2 1/2 inches of PUR foam to make a type 2 VB and the cels would not be able to match the foam's R rating per inch.
Can't see the benefits...... half of two different products do not make a whole except in your pockets.
Gabe
Edited 6/27/2002 5:09:47 PM ET by GABE_MARTEL
when he says to "seal it" is he talking about obtaining an effective VB, or just fillin' in the cracks to cut air infiltration?
-Stray
Gabe...precious comment about the hole in the pocket...I gotta start writing these down!
I give you the copyrights to that one.
Gabe