one florecet tube in my WS is having issues starting up, it takes about a minute of on and off flickering to finally start, all the other bulb come on within 5 sec. what’s up?
there’s no need to reinvent the wrench
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Fine Homebuilding's editorial director has some fun news to share.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
Starter
A La Carte Government funding... the real democracy.
heaters in the bulbs aren't getting a full dose of jucie...
dirty contcts in the tombstones or weak ballast...
could be the bulb is on the way out....
you got yur skool werk done???
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming
WOW!!! What a Ride!
Forget the primal scream, just ROAR!!!
yep.
BTW the fixtures are within a couple months new, but i'll try a new bulb, and it has 2 bulds per fixture
there's no need to reinvent the wrench
spin the bulb in it's holders a few times....
no go???
suspect the bulbs....
move the bulb on the right to the left side.. and the left to the right... spin on instaltion...
no go???
new bulbs...
still no go....
ballast...
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming<!----><!----><!---->
WOW!!! What a Ride!Forget the primal scream, just ROAR!!!