*
Id like help on how to figure compound plate angles.When framing a standard 135 degree bay that rakes up to be a cathedral ceiling,I cut the returning section studs on a compound miter so that the rafters plane down through.Which makes for a complimentary top plate angle.I cut my bottom plates on a 22.5 and put studs square to them and at the inside corner.As of now I make a model to come up with plate angles it works,yet if i wasnt such a knuckle dragger I would use some math .I use simple trig but this one has me stumped.Any help would be appreciated,Thanks in advance.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
This spray-foam sealant from Great Stuff offers mess-free, 6-in. coverage.
Featured Video
How to Install Exterior Window TrimHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
Id like help on how to figure compound plate angles.When framing a standard 135 degree bay that rakes up to be a cathedral ceiling,I cut the returning section studs on a compound miter so that the rafters plane down through.Which makes for a complimentary top plate angle.I cut my bottom plates on a 22.5 and put studs square to them and at the inside corner.As of now I make a model to come up with plate angles it works,yet if i wasnt such a knuckle dragger I would use some math .I use simple trig but this one has me stumped.Any help would be appreciated,Thanks in advance.