*
planning an outdoor pergola-type project out of I/I 4×4 or 6×6 posts. Placing above a deck to provide the feeling of an open-walled & ceiling exterior ‘room’. Have seen decorative or structural iron angle brackets and other iron pieces to tie posts to beams, connect corners, etc., Anyone know of a source for these items? Searches on the web have proved frustrating.
Thanks
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Fine Homebuilding is excited to be the official media partner of the 2024 Building Science Symposium series! This event offers builders, tradesmen, architects, designers and suppliers to discuss topics ranging…
Featured Video
SawStop's Portable Tablesaw is Bigger and Better Than BeforeHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
yes .. a steel fabricating shop near you....
*Like Mike said but find on that specialized in decorative metal work, fences, gates, ect would be a good place to start.
*
planning an outdoor pergola-type project out of I/I 4x4 or 6x6 posts. Placing above a deck to provide the feeling of an open-walled & ceiling exterior 'room'. Have seen decorative or structural iron angle brackets and other iron pieces to tie posts to beams, connect corners, etc., Anyone know of a source for these items? Searches on the web have proved frustrating.
Thanks