Below is a link to the tables. These are on the Kodak Gallery and have information below each photo. I find it easier to just use the arrows in the upper right to move thru the photos than to use the slide show button. The slide show is to fast for me. I believe there is a total of 32 photos.
http://www.kodakgallery.com/Slideshow.jsp?mode=fromshare&Uc=drgivcf.232d8zsv&Uy=-t0cw86&Ux=0
Enjoy
Edited 5/13/2007 6:05 pm ET by Burts
Replies
got an error message when i tried to go there
Mike
I fixed the link.
Burt
burt....good show... is that the 267 Hilti ?
what is the max depth you can cut with it on an EZ rail ?
i use an 8 1/4 bosch for deep cuts but i keep looking at the HiltiMike Smith Rhode Island : Design / Build / Repair / Restore
Mike,
I operate a small cabinet shop and have chosen the HIlti 267e as the primary saw for the EZ Systems. I have 3 of them. Last time I measured depth of cut, I had a makita blade on the saw and depth of cut was 1 3/4". I routinely use them for cutting 2 ply of 3/4" plywood. When I need a lot of depth I go to the "Big Foot".
Burt