Replies

1. 
   Rich_B. | Aug 26, 1999 11:14pm | #1

   *
   I've seen those small classified type ads in the back of Fine Woodworking that advertise both of the items you're after - turned legs/feet, and raised panel doors.

2. 
   Guest_ | Aug 27, 1999 01:02am | #2

   *
   Van Dyke's Restorers has the feet, a catalog, and a Web site.

1. 
   Guest_ | Aug 27, 1999 07:54am | #3

   *Try http://www.scherrs.com for raised panel and other doors. Multitude of styles and materials. Never used them, I have a local company in CA.

1. 
   Guest_ | Aug 27, 1999 09:52am | #4

   *Try Rockler Woodworking and Hardware at http://www.rockler.com Have you tried any local shops? For a pretty reasonable price you could have whatever you need.

1. 
   Guest_ | Aug 27, 1999 10:28am | #5

   *Bobby - I recently looked high and low for pine bun feet and finally had to buy a lathe and turn them myself. Found other species in several cataloges. Adams Wood Products (615) 587-2942 has 5" diameter bun feet in Maple. (you should call and get their catalog if nothing else, many styles and lengths of table legs) If you can't find what you want, e-mail me and I can turn them for you. - jb

1. 
   Guest_ | Aug 27, 1999 02:57pm | #7

   *Talk to a local shop. it is a good relationship to develope.

3. 
   BobbyT_ | Aug 27, 1999 02:57pm | #6

   *
   Hey Gang, I'm not capable of turning my own (bunn like) feet, and don't make raised or paneled cabinet type doors. In need of a woodworking catalog/supply place (on the net?) that sells turned furniture feet (not as tall as table legs), and also pine or other cabinet type doors in various sizes. Anyone have clues? Can't find any searching on the net, and need to complete a bath remodel where these are needed.
   Thanks in advance.