Flush-Cut Reciprocating Saw Adapter Review
The Flush-Cut chucks into any reciprocating saw and offsets the blade 1-1/2 in. to one side
The Flush-Cut Adapter provides a simple, effective, solution to the problem of broken reciprocating-saw blades when working on remodeling projects. To get into tight spots or to cut flush where the nose of the saw gets in the way, I’m often forced to chuck a long blade and count on its ability to flex. Of course, flexing the blade like this often causes it to bend horrifically or to snap completely off long before the teeth are worn down.
Fine Homebuilding Recommended Products
Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.
Affordable IR Camera
This camera is super useful for tracking down air leaks in buildings. The one-hand pistol grip arrangement frees your other hand for steadying yourself while maneuvering tricky job sites.
8067 All-Weather Flashing Tape
Available in 2- to 12-in. widths, this is a good general-purpose flashing tape that sticks well to most things. It features a two-piece release paper, water-shedding layers, and good UV resistance.
Handy Heat Gun
This heat gun is great for drying joint compound, primer and paint when patching drywall and plaster walls. Plus it can soften adhesive, get a very cold small engine to start, and shrink heat-shrink tubing.
Comments are closed.