MAC700 Air Compressor Review
Makita's hot dog compressor has a tool capacity of three finish nailers
With a tool capacity of three finish nailers and a cfm of 3.3 at 90 psi (coming from a 2.6-gal. tank), the Makita MAC700 packs more punch than other hot dog compressors. Its cast-iron cylinder increases pump life, and although easily damaged, the aluminum fins mounted on the intake coil aid in cooling the air, which decreases the strain on the motor. The glass window on the oil pan makes it easy to monitor the oil level.
Fine Homebuilding Recommended Products
Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.
8067 All-Weather Flashing Tape
Available in 2- to 12-in. widths, this is a good general-purpose flashing tape that sticks well to most things. It features a two-piece release paper, water-shedding layers, and good UV resistance.
Handy Heat Gun
This heat gun is great for drying joint compound, primer and paint when patching drywall and plaster walls. Plus it can soften adhesive, get a very cold small engine to start, and shrink heat-shrink tubing.
Reliable Crimp Connectors
These reliable, high-quality connectors from Wirefy work on 10-22-gauge wire have heat-shrink insulation to keep out water and road salt.
Comments are closed.