DC618K 16-ga. Finish Nailer
The DC618K 16-ga. finish nailer boasts fast cycle times between shots.
My biggest problem with all three of the Dewalt tools is their weight, which makes them as heavy as a modern pneumatic framing nailer. I also find the six-position depth of drive to be problematic and imprecise. Even when adjusted to its minimum drive, it blows nails right through thin moldings. On the plus side, the DeWalt nailers have faster cycle times between shots than any of the other flywheel tools.
Fine Homebuilding Recommended Products
Fine Homebuilding receives a commission for items purchased through links on this site, including Amazon Associates and other affiliate advertising programs.
Reliable Crimp Connectors
These reliable, high-quality connectors from Wirefy work on 10-22-gauge wire have heat-shrink insulation to keep out water and road salt.
8067 All-Weather Flashing Tape
Available in 2- to 12-in. widths, this is a good general-purpose flashing tape that sticks well to most things. It features a two-piece release paper, water-shedding layers, and good UV resistance.
Handy Heat Gun
This heat gun is great for drying joint compound, primer and paint when patching drywall and plaster walls. Plus it can soften adhesive, get a very cold small engine to start, and shrink heat-shrink tubing.
Comments are closed.