Replies

1. 
   jcallahan | Sep 11, 1999 07:44pm | #1

   *
   I don't have plans ........but there are portable drafting tables. The one I have has short legs ...... it's designed to be set up on a tabletop, it has a parallel rule on it and a carrying handle. It will handle C size sheets ..... as far as cost, I couldn't say ...... it was a gift. I'm sure you could make your own version of it.

1. 
   Rich_Beckman | Sep 11, 1999 09:37pm | #2

   *This sounds like a job for Knots! I'll bet a posting there gets more productive responses.Rich Beckman

1. 
   Sather_Ekblad | Sep 15, 1999 08:24pm | #3

   *Rich:Tried to post it over there but they seem to have a higher proportion of down days with their web site. I'll try again. Thanks.

1. 
   DSOB | Sep 22, 1999 08:53am | #4

   *SatherPortable or knockdown?My first "space-saver" drafting table was a hollow-core doorhinged to the wall, with a parallel rule fitted to it. (I've rented some CHEAP apartments) If you are looking for "portable" look at Autosketch on a lap top. A cheaper alternitive would be to get some 1 X 3 oak and copy a TV tray-table at about 2X normal size with the front two legs a shorter length, to suit your preference.Scott

2. 
   Sather_Ekblad | Sep 22, 1999 08:53am | #5

   *
   I was hoping that someone out there has plans or ideas for a breakdown drafting table. I know it's not the most exciting subject, but I'd really appreciate some input. I intend to fit it with a parallel rule. Thanks.