*
I have built a covered Porch on the back of the house, which is a good thing. Post and Beam Cedar with 3 bays of approx 9ft I 12 ft with one end being the house and the other being, well not the house and open to the air. I finished the thing late in the fall, and now need to get to the screens, yet another in the RI pile that needs to be knocked off. My questions for the esteemed forum are not earth shattering but web searches reveal many who will sell me the service but few who will explain…and I want to use wood
– What size stock should I use for the screens (There would be 3 panels per bay) 2×2?
– What is the best way to do the corners… half lap with glue and a peg?
– Are there any resources out there that could show me how to do this
Ubique
Regan
Replies
*
I have built a covered Porch on the back of the house, which is a good thing. Post and Beam Cedar with 3 bays of approx 9ft I 12 ft with one end being the house and the other being, well not the house and open to the air. I finished the thing late in the fall, and now need to get to the screens, yet another in the RI pile that needs to be knocked off. My questions for the esteemed forum are not earth shattering but web searches reveal many who will sell me the service but few who will explain...and I want to use wood
- What size stock should I use for the screens (There would be 3 panels per bay) 2x2?
- What is the best way to do the corners... half lap with glue and a peg?
- Are there any resources out there that could show me how to do this
Ubique
Regan