*
I am planning on a built-in corner computer desk in my study and am looking for any resources for this. My initial thoughts are to make 2×4 walls, 30″ high by 24″ out from existing wall. I will place four of these babies, with the inner ones at 32″ from corner, and the outer at the end of unit (~70″ from corner). Sheathing these walls with beadboard, and topping it all of with some furniture grade oak 3/4ply…..then adding all the trim…..any rules of thumb for proper heights,spacings for legs at corner,etc,,,,,thanks
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
From plumbing failures to environmental near disasters, OHJ staffers dish on our worst and best moments.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
> See this months FHB. There is an article in there about home offices and it gives proper heights.
*
I am planning on a built-in corner computer desk in my study and am looking for any resources for this. My initial thoughts are to make 2x4 walls, 30" high by 24" out from existing wall. I will place four of these babies, with the inner ones at 32" from corner, and the outer at the end of unit (~70" from corner). Sheathing these walls with beadboard, and topping it all of with some furniture grade oak 3/4ply.....then adding all the trim.....any rules of thumb for proper heights,spacings for legs at corner,etc,,,,,thanks