My pulls for cabinets were off for 8 doors. 1 drilled hole was off (the top by 1/8″). How would I correct this mistake. Was thinking bondo and redrill because the pulls would cover that mistake. These are maple doors with a cedar wood tone.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Making mitered head casings is a breeze with this simple system.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
If the pulls cover the incorrect hole, why bother filling the extra hole?
Fill holes with Bondo. Make a jig to locate new hole so bit won't slip when drilling new hole.
Frankie