Replies

1. 
   RalphWicklund | May 28, 2008 06:25am | #1

   20 SHEET OF PLYWOOD ,I USED THIS TO COVER MY WALLS AND CIELING OF MY SHOP,THERE COULD BE 100'S OF OTHER USES. THEY MEASURE 38 1/2 x 52 inchs x 7/16 thick 2.50 each or 40.00 for 20 sheets. have @250 to 300 sheets left

   This? is LVL type material?

2. 
   Waters | May 28, 2008 06:28am | #2

   Looks like that's just 7/16" ply, no?

   Good deal if you were sheeting a house tho.

    

1. 
   JulianTracy | May 28, 2008 01:30pm | #3

   http://detroit.craigslist.org/mat/697406697.htmlMust have posted the wrong link.... here's the correct one - 1 3/4" thick 5'x16' sheets of some serious plywood.That's what I was referring to.JT

1. 
   DougU | May 28, 2008 01:39pm | #4

   I dont know what I'd do with it but you aint gonna haul that in your short bed pickup!

   Cant imagine what that stuff would cost new? or what it's intended purpose would be? But that wouldnt necessarily stop me from buying it!

   Doug

    

2. 
   RedfordHenry | May 28, 2008 02:43pm | #6

   Interior walls in my 180' yacht.

3. 
   Sphere | May 28, 2008 03:01pm | #7

   My own bowling alley in someones yard.Spheramid Enterprises Architectural Woodworks

   Repairs, Remodeling, Restorations

   New book alert; Eckhart Tolle "A new earth"

   A must read.

4. 
   DanH | May 28, 2008 03:58pm | #9

   Great for making box beams. (I wonder how much weight a 5-foot deep beam can support?)4-man job to lift the things, though.
   What is wanted is not the will to believe, but the will to find out, which is the exact opposite. --Bertrand Russell

5. 
   Waters | May 28, 2008 04:49pm | #10

   Whoa!

   Elephant crates?

   Tank subfloor? 

6. 
   Chucky | May 28, 2008 07:22pm | #11

   They would make a nice flat top for a workbench or table.

7. 
   mikeroop | May 29, 2008 05:13am | #13

   I'd cut LVL beams out of it.

1. 
   segundo | May 29, 2008 05:54am | #14

   i think cutting lvl's out of it is the winner, they are 16' long that would work for lots of stuff

3. 
   Danno | May 28, 2008 01:58pm | #5

   Build a big, honking airplane!

4. 
   junkhound | May 28, 2008 03:11pm | #8

   a shed

   Have about 1500 sheets of 1.8 cm by 3m x1.5 m baltic birch still for sheds. <G>

5. 
   Clewless1 | May 28, 2008 08:35pm | #12

   Maybe a large arched wood roof similar to the Kibbie Dome located in Moscow Idaho (Univ. of Idaho). If I recall, that was a truss joist style roof truss about 8ft deep w/ something like 1 7/8" plywood attached both top/bottom. It's not a dome, though it is a vaulted arch (like half a beer can).