*
I am installing ceramic tile on a concrete stoop, and need to cut off an commercial aluminum door so it will clear the new tile. Is there any special trick to cutting an aluminum door? I bought a metal blade for my circular saw and was told to wax it before cutting. Is there any other concerns not associated with normal doors? I am doing this in about 6 hours, so any help would be appreciated.
Pete
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Fine Homebuilding's editorial director has some fun news to share.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
Peter, I've not cut an aluminum door, but a lot of aluminum stock. Usually a real good wood blade will give the best results. If that blade you bought doesn't act like its right, don't use it- try a carbide crosscut with plenty of teeth.
*Agree with Lonecat....ear protection and safety glasses..you can also plane it with your electric plane ( set fine)
*
I am installing ceramic tile on a concrete stoop, and need to cut off an commercial aluminum door so it will clear the new tile. Is there any special trick to cutting an aluminum door? I bought a metal blade for my circular saw and was told to wax it before cutting. Is there any other concerns not associated with normal doors? I am doing this in about 6 hours, so any help would be appreciated.
Pete