Hello to all… I am looking to make an “in railing” type gate for a typical 2×2 baluster & 2×4 deck painted deck, whats the best? it will need to be about 40″ tall & 32″ wide. thanks!
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Listeners write in about haunted pipes and building-science tomes, and they ask questions about roof venting and roof leaks.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
I just made one for a set of deck stairs that led to a pool. I used cedar 2x4s for the frame, lapped at the corners, glued and screwed, a diagonal brace, then 2x2 cedar balusters. I capped it with a cedar 2x4 milled to shed water and rounded the corners/edges.
"I am the master of my fate, I am the captain of my soul." Invictus, by Henley.