I did a search and did not find any info for a propane fuel dryer installation that would allow the unit to set close to the wall without having an exposed run of vent pipe. This is new construction, 6″ nominal wall. This install is slab on grade so I need some rise in the wall to keep the exhaust vent out of snow. I checked at one of the “big boxes” last week to see if there is some sort of prefab vent setup, but all I got was “I dunno-never seen anything like that” Thanks in advance for your input. Roger
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Few people understand it. Nobody agrees what it is, how to learn about it, or who's responsible for it. It has never been more important
Featured Video
Builder’s Advocate: An Interview With ViewrailHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
Roger,
There is a product called "DryerBox".Take a look http://www.dryerbox.com/
I built-in the same type of installation/box for my dryer and included the gas drop and shut-off valve.