Does anyone know if it is possible to install drywall over trusses? I am renovating my home and would like to take full advantage of the space between the 8 foot ceiling line and the roof.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Listeners write in about haunted pipes and building-science tomes, and they ask questions about roof venting and roof leaks.
Featured Video
How to Install Exterior Window TrimHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
I was helping my brother trim a new house last weekend and I remember him showing me what a wall looks like when drywall is covering the trusses. Quite a wavey wall! They had to shim this big ornate chairrail so at least it would appear straight! He told me the correct way is to scab 2 x 4's along the sides of the trusses in order to have a straight wall. Run some string just to the outside of the trusses, for a straight line, and put the edge of the 2 x 4's up against the string. jocobe
Could you explain what you mean? Are you talking about taking out the existing ceiling, and drywalling both sides of the trusses so you can see all the way up to the underside of the roof? Or is it somehting else?
I don't have a clue from your sdescription.
All teenagers should get a high school education -- even if they already know everything.
Im with you boss. I was sitting here trying to figgure what he could mean. But it did bring a drywall guy and a truss guy in here . lol
Yes, that is exactly what I think I am trying to accomplish. I had to remove a soffit in the kitchen and discovered there is no ceiling underneath most of it (a small 3 foot section did have ceiling underneath?! Anyhow, when I looked up where the sofit used to be, I noticed the trusses, the roof, and about 3 1/2 feet of space between the traditional 8 foot ceiling height and the roof. I am wondering if this space can be used to raise the kitchen ceiling. I am thinking it would involve covering the trusses with drywall -- if this is at all possible. I am new to all of this. Thank you for your time!
I wouldn't recommend it for the following reasons:
1. The trusses aren't designed for the added load of the drywall.
2. It would take a heck of a lot of labor, both for installation and finishing.
3. The bottom chords of the trusses wouldn't be braced.
4. this would pretty much eliminate any possibility of ventilation.
The other night I ate at a real nice family restaurant. Every table had an argument going.
Thank you for your advice. I will stick to the original plan and just install a traditional 8 foot ceiling.