T.W.I.M.C.,
This is my first posting, so go easy on me…
I am installing a Durat Tub and am running into problems with a conflict with the overlflow drain location and accomodating my hot and cold fixtures. Has any one dealt with this tub? None of the online images show the overflow drain. Could this be due to the nature of foreign building codes being more permissive? Let me know if you have run into similar issues, or know where to point me. Unfortunately the local rep is not experienced enough with the product short givings to give me more insight. This is a learning experience for us all.
best regards,
j
Fine Homebuilding Recommended Products
Flashing Boot Repair
Prolonged exposure to the sun and weather can compromise the rubber gasket on standard vent flashing. Use this to quickly and permanently fix failed seals or to help protect the gasket in new-construction applications.
100-ft. Tape Measure
Laying out mudsills and foundations for new homes and additions requires a bigger tape measure than your everyday carry.
Portable Wall Jack
Raise walls safely with the Guardian wall jack — we’ve personally seen small teams raise large walls with these devices, and they work great.
Graphic Guide to Frame Construction
Now in it’s 5th edition, Rob Thallon’s book for builders has been a go-to resource for decades. This book features clear graphics that will help you understand how nearly all American houses are — or should be — built.
Insulation Knife
If you like insulating with mineral wool, this knife makes cuts that are clean, neat, and easy — it's much better than a utility knife which can be slow and messy.
Replies
Do you have a link show a picture and/or other details of the specific tub that you have.