I know this ought to be in tools but I am hoping to get a quick answer before I go spend money… the time has come to buy a set of electric sheet metal shears. I would think that one of the manufacturers has a pair that can have either a sheet metal head or a fiber-cement head, but oddly enough no one seems to advertise them that way. I would much prefer to buy a set that I could install a fiber-cement head on for later use. Does anyone know if one of the manufacturers does this?
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Fine Homebuilding is excited to be the official media partner of the 2024 Building Science Symposium series! This event offers builders, tradesmen, architects, designers and suppliers to discuss topics ranging…
Featured Video
Video: Build a Fireplace, Brick by BrickHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
Nick,
Kett says the heads interchange. Get the nibblers too.
http://www.kett-tool.com/webpages/tools/cutting%20tools.htm
KK
And I have the PorterCable and they do NOT interchange (but they should). Besides, the Kett, for $10 more has a 1/2" capacity and can cut 1/2" Hardiboard.
Thanks guys, I thought I had looked at the Kett page before, but maybe I missed the part about the heads being interchangable. I was going to make an impulse buy ( I have a bunch of ductwork to rough in this week), but I didn't want to waste my money on something I can't put a fiber-cement head on.
Thanks again for the info.