I’m looking for a supplier for exterior glulams. Either cedar or redwood would work or some other wood that would be apperance grade and structual. I’ve run out of luck at the local lumber yard. Somebody makes them I hope.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
A small and dated house lends its foundation to a stylish new home with more than twice the space.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
I'm working on a house (I know, it looks more like a barn<G>) with these 6 x 15 fir glue lams. From these guys:
http://www.potlatchcorp.com/wood/glued.asp
The tails are outside, but wrapped in Grail Coat, so I'm not sure how they'd hold up unprotected. They do use an exterior glue, though. Hope it helps.
Don't worry, we can fix that later!
Ok, here's the shack<G> Don't worry, we can fix that later!