Is it possible to put a return on a piece of trim, let’s say baseboard, that’s been cross-cut on an angle? (That is to say, not perpendicular to the profile). Like 76.5 degrees, i.e. 13.5 degrees on the miter saw.
Intuitively, I’d think there’d be a way of doing this, but I can’t wrap my head around it. Spent quite some time today playing around.
Replies
It's possible to play with the angles and match two pieces but the return is apt to be at an undesirable angle.
Have a look at these links:
http://forums.taunton.com/tp-breaktime/messages?msg=102767.10&redirCnt=1
Edited 3/31/2008 5:32 pm ET by JoeBartok