I would like to install vertical fiber cement panels over basement walls (framed). But cant find anyone that will sell less than a palet (50 sheets). I only need about 13 sheets. Any ideas anyone? Roger
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
This window and door expert is committed to repairing and restoring newer window systems to preserve their value and extend their lifespan.
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
I don't know where you're located, but most of the building supply outlets I'm familiar with will sell pretty much anything in broken units, it just raises the price per item a little. If your local yards are small and can't keep big inventories, you should be able to get them to special order what you need from their wholesaler.
I agree with Notch. Are you calling retailers or distributors? Are you asking for delivery? Every retail and builder outlet around here will sell any quantity from one piece to a truckload. The only difference is the discount for quantity, and delivery for a large order.
You might try any local contractors that install the stuff. 13 pieces might amount to the left overs from a job. Some might let you have them at cost or free. It depends on you diplomatic skills. Nothing to lose as all they can say is no.