*
We live in an area that gets very humid in summertime…which swells the interior doors and makes them difficult to close. Rather than plane the doors, I’d like to seal the top and bottom edges to keep the moisture out.
What’s the best substance to use? The two faces of the doors are painted in an oil-based paint; should I use that on the edges or use a polyurethane-type material?
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Learn the specific guidelines for location, spacing, and clearance for optimal safety.
Featured Video
Highlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Fine Homebuilding Magazine
Fine Home Building
Follow
-
Fine Homebuilding
Dig into cutting-edge approaches and decades of proven solutions with total access to our experts and tradespeople.
Start Free Trial Now -
GBA Prime
Get instant access to the latest developments in green building, research, and reports from the field.
Start Free Trial Now
Replies
*
We live in an area that gets very humid in summertime...which swells the interior doors and makes them difficult to close. Rather than plane the doors, I'd like to seal the top and bottom edges to keep the moisture out.
What's the best substance to use? The two faces of the doors are painted in an oil-based paint; should I use that on the edges or use a polyurethane-type material?
*
.....same finsih as the face....but they can still take in moisture at the joints ..especially if they are a panel door..you can't seal the panel because it has to be able to move...it's almost the nature of the beast..which is another reason 6-panel molded doors are so popular with builders (or with me anyway) I hate what seacoast moisture does to doors..
don't forget to seal behind the hinges too