I have a job coming up:
About 35′ long x 6′ deep of shed roof across the front of a sort of beat up office building. Existing cc patio–roof will stand on 6 new posts to simple end beam and 2×6 rafters on 24′ centers. Open, no soffit–real simple.
Gonna go with a tin or otherwise solid panel roof over purlins, but they want clear panels alternated in where there are two 6′ sliding windows and a 3’0 door to let natural light into the building.
What panel roofing product should I be looking at/for that has clear and solid corrugated, smooth or delta-rib type panels that are compatable and have preformed rake trims available?
I’ve done quite a few simple patio roofs/covers with suntuff corr. panels but this should be more sturdy than that sort of thing.
A few tips and I’ll be off running!
Thanks,
pat
Replies
Go here, for starters.
http://www.resolite.com
It's been a while, but I have bought, and my crews put up, acres of this stuff. Good old company.
thanks,
I emailed 'em.
Pat
Any others?
I've also dealt with Kalwall and Major Industries, but the FRP wall and roof panels they make aren't what you want.
Do you have any rough guestimates as to the current cost of Kalwall in smaller quantities?Thanks