*
I am attempting to install my own window trim on a new house. What is the easiest way to get the window jam flush with the sheetrock when the sheetrock is out past the jam? I rasped the first one and it made a heck of mess. There has to be an easier way! The majority of my windows are inset around 1/4″ from the sheetrock.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
![](https://images.finehomebuilding.com/app/uploads/2024/07/26121735/FHB-Pod-Ep-642-Short-1-Feature-thumb-16x9.jpg)
Learn about solutions and fastening methods to prevent truss uplift issues.
Featured Video
Builder’s Advocate: An Interview With ViewrailHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
Why not add a 3/4" by 1/4" filler strip to extend the jamb out to the drywall?
Set the filler back 1/8", maybe 3/16" from the inside edge of the jamb to create additional detail and an extra shadowline.
Glue with Titebond, and tack with a few brads.
If paint-grade, use poplar...if stain, go with same-species.
*Or you could cut out the sheathing around each window.... Just kidding, what Mongo said.Mike
*Too late to get a good framer, eh?
*
I am attempting to install my own window trim on a new house. What is the easiest way to get the window jam flush with the sheetrock when the sheetrock is out past the jam? I rasped the first one and it made a heck of mess. There has to be an easier way! The majority of my windows are inset around 1/4" from the sheetrock.