Hi All,
I’m from Ireland, this is my first time posting a discussion. I was wondering if ye could give me a good web site where I could buy a good leather tool pouch. I ordered an occidental leather earlier in the year but unfortunately it wasn’t for me. Maybe because I’m lefthanded.
I was looking at the ones from McRose Leathers, does anyone have any comments, advice please???
Replies
If I'm not mistaken Occi makes different bags for both left and right handed people. You may want to call the company and see if they can help you out. I only had to call them once though I received excellent service that one time.
Actually, they reserve the better bags for customers here in the colonies and ship the rejects across the pond.
"When asked if you can do something, tell'em "Why certainly I can", then get busy and find a way to do it." T. Roosevelt
Thats great , I got done again! and there was me thinking people liked the Irish!!!
Edited 12/15/2006 4:10 pm ET by emmetnee
I would recomend that you not purchase tool pouches, over the internet.
Your tool pouch is like second skin....it needs to be handled...tried on....and tried out....before making the decision to buy.
Stop by some of the more reputable tool sellers in your area. See what they have to offer. Check em out up close and in person.
Happy
Holidays
I would but unfortunitely there is not much choice over here, especially with leather. The problem is being left handed, every pouch over here is to cater for right handed people
Edited 12/15/2006 4:32 pm ET by emmetnee
Good thing you're not in Oz, they have to buy upside-down bags, and finding one of those in a lefty model is tough.
Ok, so the obvious answer is for someone here who is left-handed to step up and offer an opinion. I think I might follow someone else's idea and contact the customers service dept at Oxy and see if they have a recommendation.
"When asked if you can do something, tell'em "Why certainly I can", then get busy and find a way to do it." T. Roosevelt
does anyone know about McRose Leathers? I know they make them for leftys aswell
http://www.mcroseleathers.com/catalog/index.php
I bought a set of leather bags at sears clearanced.
They did not have a hammer holder so I went back a week later and they had the matching hammer holder clearanced.
I like this setup as I too am left handed and this way I can put my hammer in front or behind my left bag.
They are a nice set of bags and I dont have 60$ invested.
ANDYSZ2WHY DO I HAVE TO EXPLAIN TO FRIENDS AND FAMILY THAT BEING A SOLE PROPRIETOR IS A REAL JOB?
REMODELER/PUNCHOUT SPECIALIST
Don't know about McRose. After 25 years of trying everything on the market, I'm back to the free cloth aprons that the lumberyards give away. Just like every other old fart that I see on the job.http://logancustomcopper.com
http://grantlogan.net/
http://www.chicagotribune.com/classified/realestate/homeimprovement/chi-010316outdoorrenovation,0,2786095.htmlstory?coll=chi-classifiedhomeimprove-utl
Grant----- you just touched on an idea of merit that we would ALL be wise to at least consider.
I have a set of occys that i love---but they have a significant dis-advantage---weight.
last year or so- I have been experimenting with a wide range of kind of bizzarre belt set-ups.
i also have been collecting some ooooold carpenters manuals( if I am going to be working on houses of this vintage--it's fun to have the books which reflect the "up-to-date" thinking of the time)---------- one interesting thing---all the books talk about building totes" convenient for carrying on to scaffolding"---which got me thinking about my father in law who I never saw use anything except a cloth lumber yard apron.-- my dad tells me that my grandpa wore ONLY white duck bibs( like painters?)-and a canvas nail apron.
so-it seems that the old guys REFUSED to turn themselves into walking hardware stores------ look at some of these set-ups today. the tradesman has been turned into a pack mule with " saddle bags "hanging down almost to the knee on BOTH sides--and maybe even one on the back--plus an oversized framing hammer--despite the fact he uses a gun for almost everything.
I know my occys are great-- I bet I NEVER wear 'em out. they are particularly great--when i am standing on the ground working at saw horses------but if I have to climb, crawl, squat---fuggetaboutit.
i like that canvas apron idea!
stephen
Edited 12/16/2006 6:24 am ET by Hazlett
A few months back I bought a pair of the white bib overalls with the cloth apron built in. Pretty nice! I don't wear them out on the job since my day isn't one hundred percent toolbelt all day. BUt I probably would if it was.
Pardon my fat fingers.
http://www.hay98.com/
Never heard of 'em with the apron built in...Got a link?_______________________________________________________________
I do all of my own stunts
http://www.carhartt.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10101&storeId=10051&productId=32173&langId=-1&categoryId=10909#
Pardon my fat fingers.
http://www.hay98.com/
Thank you. I see that the hammer loop is on the left. I have never figured this out.
I might have to try some one day._______________________________________________________________
I do all of my own stunts
I would wear the bibs for 2nd fixing but couldn't imagine wearing them on a roof, thats just my opinion, I'm very fussy, I'm looking for a pouch with room for all my bits for up on a roof but also that is very comfortable to wear all day long.
I'm a lefty, and I've got a set of Oxy Lite framer's bags that are 3 years old...man, I don't think they'll ever break in<G>and by the same token, I don't think they'll ever wear out.If you get the McRose bags come back with a report...I like the oxys, but they're not that comfortable, and the pocket arrangement feels a little off, for me. Oh God said to Abraham, "Kill me a son"
Abe says, "Man, you must be puttin' me on"
God say, "No." Abe say, "What?"
God say, "You can do what you want Abe, but
The next time you see me comin' you better run"
Well Abe says, "Where do you want this killin' done?"
God says, "Out on Highway 61."
Hi Snort
Thanks for your opinion, I feel the same way about my oxys. They just dont do it for me, I feel they are more awkard and protrude out way too much. They dont feel they will ever mold to my body. Its a pity because they are very well made, without a doubt they will last a lifetime but I cant ever see them being comfortable.
I ordered a set from McRose Leathers. I hope they are what I am looking for. They took my height, waist size, leg length and asked what tools I keep in each pouch. It will be custom built so I cant wait to get it now. Dennis the guy who makes them seems really nice and helpfull. Its going to work out cheaper than the oxys so thats not too bad, a few $$$ more for me for a few beers over the Xmas!
I will let you know all about it when it arrives!
Edited 12/16/2006 3:03 pm ET by emmetnee
Custom made...now you're talkin"<G> I'm going to check them out,thanks. Oh God said to Abraham, "Kill me a son"
Abe says, "Man, you must be puttin' me on"
God say, "No." Abe say, "What?"
God say, "You can do what you want Abe, but
The next time you see me comin' you better run"
Well Abe says, "Where do you want this killin' done?"
God says, "Out on Highway 61."
I wonder what would happen if you dunked the belt in water and strapped it on until it dried? That's how we used to have to break in leather ski boots in the old days.
BruceT
It's the foam in the bags...it keeps them open for easy grabbing, but it's never seemed to relax...I have a pair of CLC bags that are oxy knockoffs. They are much more comfortable...I just need to learn to do everything right handed<G> Oh God said to Abraham, "Kill me a son"
Abe says, "Man, you must be puttin' me on"
God say, "No." Abe say, "What?"
God say, "You can do what you want Abe, but
The next time you see me comin' you better run"
Well Abe says, "Where do you want this killin' done?"
God says, "Out on Highway 61."
one interesting thing---all the books talk about building totes" convenient for carrying on to scaffolding"---which got me thinking about my father in law who I never saw use anything except a cloth lumber yard apron.-- my dad tells me that my grandpa wore ONLY white duck bibs( like painters?)-and a canvas nail apron.
Worked with a chap that had a seven tier fastener bag - which he custom made for his needs. He also had an electric pencil sharpener in one of the other bags - there were four on his belt.
Having felt the burden of a lot of tools, I went to a bags and bucket system. Only things in the belt are the basics and those tools needed for the job at hand. The rest of the stuff is in a bucket a few steps away or in the van or in the garage.
I have a 5g bucket with an organizer and a lid/seat/fastener stowage set up for each trade. In the morning I try to pick the one(s) I will need that day. On occasion I get it right.
The ToolBear
"Never met a man who couldn't teach me something." Anon.
Know about the Veto bags?http://tinyurl.com/ychsllI bought the middle size (XL) a couple of years ago, and it's the cat's meow for me.********************************************************
"It is what we learn after we think we know it all, that counts."
John Wooden 1910-
Know about the Veto bags?
Yes, have one in the attic. (Freebie.) Never quite fit what I do. I would use a lighter shade of brown. Loaded it up and then went hunting for the tools in it.
My tool load out changes every day. I favor Husky open totes. Have one for mechanials and another for sweating copper plumbing. The rest are in bucket organizers.
If one thing could carry all the tools I need, it would be a 550 14' box van. Which I could not find parking for in these condo projects. A trailer will not work for us. My van is helpful. It can get around and in and out.
I shift between trades on a daily basis, so I have 6 different tool belts set up and matching buckets. Thus equipped, I can rest assured that what I really need for the latest surprise in in the garage. Never a dull moment.
Example: Load electrical and come to deal with reports of a string of area lights out (one lamp). There is a nice hole in the block wall where some twit drove a vehicle thru. Must have been an OOwie. The rest of the wall is wiggly and must come down. The ToolBear
"Never met a man who couldn't teach me something." Anon.
I see what you mean.........I have some of those open Husky totes, which I use for job specific items. But that Veto bag and I get along very well with one another. It carries all the hand tools that I would like to have with me, no matter what the task.But your job .......... do you lay awake at night trying to remember all the tools you'll need for the next day? <G>********************************************************
"It is what we learn after we think we know it all, that counts."
John Wooden 1910-
But your job .......... do you lay awake at night trying to remember all the tools you'll need for the next day? <G>
Well, as a matter of fact I might be reviewing the process. <g> I have had some good ideas on how to solve a problem in the wee hours. At 0515 on one area lighting contract.
On the other hand, it's futile. The rule is that what ever tools you loaded, you won't need. If I'm rigged to frame, I need the electrical bags. Our missions change with the day and hour.
I carry a good selection of general purpose stuff in the van - shovel, fasteners, paint tote, caulk tote, multi ladder, trim bags, mechanicals tote, etc. The latest is the Husky bag. Got tired of the Bosch impact driver case dumping all the bits into the bottom. Put the driver and a cordless drill in one bag with all the bits and thingies.
I often have a list of what has to be loaded sitting on the brief case. The buckets are staged by the front door with care, in the hopes that ToolBear will remember they're there.
The buckets with their contents are worth about $300-500 each so they and the power tools stay in my office/tool library. The garage and van have both been hit before.
The ToolBear
"Never met a man who couldn't teach me something." Anon.
Sounds like even having a big trailer would not solve your problem.There is an outfit around here that packs all their stuff in one of those huge semi-truck trailers, and they just park it at the job, but none of their projects are one or two day affairs.I think you'd look good with one of those rigs, maybe with one of those fancy Kenworth's with the posh sleeper cab?********************************************************
"It is what we learn after we think we know it all, that counts."
John Wooden 1910-
Sounds like even having a big trailer would not solve your problem.
I will visualize trying to get a semi and trailer into The Vineyards. Nope. Crush too many BMWs and Lexii.
I think a 14' box truck would work. <g>
Some framers up in the islands have a used U Haul set up for them. Onboard compressor, etc. Pull up, hook the truck to the power, roll out and do it.
Boss is thinking of a utility body truck. That would work fine. You can find parking for it. Ladders on top, on board gen set and air. A bin per trade and lots of parts. Had one when I worked for a telco firm, doing cell towers. Nice. The ToolBear
"Never met a man who couldn't teach me something." Anon.
I'd be happy to take that pesky Veto bag off your hands for you.
Dave :^)
I'd be happy to take that pesky Veto bag off your hands for you.
Alas, it was donated by a good friend who may inquire after it. The ToolBear
"Never met a man who couldn't teach me something." Anon.
toolbear,
this summer I weighed what I typically toted around in my occys---along with the belt-- i was horrified.
my problem is--that for purely shingle installs I need minimal hand tools---however on our projects i do all the carpentry and flashing details--so i habitually carry a lot of stuff i NEED on each project-but actually use infrequently or for only a few minutes each day.
a few years ago, I actually fired a guy , partly because he refused to wear a tool belt. he would reach a certain point in the project, take the belt off, scatter nail coils around on the roof and start nailing. EVERY mis-fire, he would have to walk across the roof, get a hammer, pound the nail flush,put the hammer back and resume nailing.-drove me CRAZY.
now I am a bit more sympathetic--but not to that wastefull extreme. I am trying to strip down to bare essentials and carry the rest in a tote--usually never a good place to put one on a roof. though LOL.
the Occys i like, but they are not perfect. i will never wear them out------but the left bag hangs too low and constantly drags on the roof. I am doing increasing amounts of interior work--and they are impossible to wear inside in finished surroundings. I go about 240#--the bags are WAY too wide and the hammer is constantly wanting to bang into doorways etc.
Friday, at a lumberyard I saw some new tote bags from Irwin that looked good for interior work-- i may give them a try. i think i can fit what i basically need indoors into one and bring it in and set it up next to my work area as a work station-and work from that.
stephen
this summer I weighed what I typically toted around in my occys---along with the belt-- i was horrified.
What did they weigh out at? I am afraid to weight mine. I think they are down to fighting trim. The stuff in there gets a lot of calls.
my problem is--that for purely shingle installs I need minimal hand tools---however on our projects i do all the carpentry and flashing details--so i habitually carry a lot of stuff i NEED on each project-but actually use infrequently or for only a few minutes each day.
My approach is multiple belt rigs, each one loaded for a trade, all on Oxy belts with suspender loops and one set of suspenders going between. Sort of like getting a tire change at the Indy. Pull in to the pit, swap belts and back at it. Witht the change of belts, you are now optimized for that trade vs. trying to carry six trades in one rig. There are bucket organizers that go with the belts.
Got trim, on go the trim bags. Got electrical, suspenders shift to that set of bags. Ditto for framing, drywall, phone/cable.
The current experiment is a set of utility bags. I find I need a lot more pliers, dikes, etc. that the normal framing bag is designed to handle. I have a new set of Oxy barrel bags I am trying out. What they really need is a set of pouches in the outer wall of the tool bag. That would do for me.
I hate fishing in the bottom for stuff. I want the hand to fall on it and draw it. I suspect the answer is an electrician's tool bag. The ones at HD are efficient in their layout, but the sharp rivited corners are very uncomfortable. I want a sparkie bag built like an Oxy light bag. Rounded corners with leather patches.
I am trying to strip down to bare essentials and carry the rest in a tote--usually never a good place to put one on a roof. though LOL.
Remember one framer walking the plates. He was sneakers, shorts and belt with absolute minimum of tools. Quite unlike moi.
Where to put stuff on a roof is an interesting question. For one project I cobbled together a horizontal tray on supports set to the roof pitch. We'd put a nail it in to be sure. All the fasteners and clips and stuff went in there.
Something based on adjustable roof jacks would work - or something that went over the ridge like a saddle bag. Or, a fabric bag with a lanyard and nail. Climbers have solved this problem and they work pitches beyond 18/12 <g>.
the Occys i like, but they are not perfect. i will never wear them out------but the left bag hangs too low and constantly drags on the roof.
I though roofers wore single bags because they had one side resting on that bit of scrap foam as they shingled.
I am doing increasing amounts of interior work--and they are impossible to wear inside in finished surroundings. I go about 240#--the bags are WAY too wide and the hammer is constantly wanting to bang into doorways etc.
Sounds like my weight. One ToolBear = 1/8 ton. It's the Oxy Lights for trim. Looked at their trim bags and decided I wanted more capacity for other jobs. The hammer has to go on the butt (claws vs. Mrs. Gotbuck's antiques) and I have learned to go through the doors and the house sideways, both paws over the bags. For a lot of what I do, I can use an electrician's tote and park the bags in the corner.
Friday, at a lumberyard I saw some new tote bags from Irwin that looked good for interior work--
Husky was having a TwoFer at HD. Got a 16" and 14" bag for $20. Good price.
I have a convertable platform wagon (Costco), that mounts 3-4 milk crates with room for a ladder, compressor, etc. between the two ranks of crates. It works well to hold gear, provide a work bench, a rolling step up bench, etc., etc. Swap the crates to change the loadout. Plywood tops. Sit on the single crate up front and use the double crate to the rear as a desk. Many uses.
I would do more with the crates, but no one makes a good crate organizer. Used to. Not finding any now. Stacking hardwood silverware organizers from IKEA (birch, nice, $10) are a way to organize the interior.
The ToolBear
"Never met a man who couldn't teach me something." Anon.
I can't remember exactly what the weight was---but i remember switching to different belt and weeding out some tools lightened the load almost 9 pounds. the new belt was un-satisfactory though-and i am back to the occys--and the tools are starting to creep back in
stephen
I can't remember exactly what the weight was---but i remember switching to different belt and weeding out some tools lightened the load almost 9 pounds. the new belt was un-satisfactory though-and i am back to the occys--and the tools are starting to creep back in
Need to sort over the tools often. "Am I going to use this pocket lathe today?"
Amazing how many belts are out there that are made with nice materials, neatly sewn, and totally clueless in design.
Once you use Oxys, lessers designs always nag. (However, the worse design I own is a set of Oxy electrical bags. They had not a clue as to what a sparkie carries and what size the tools are.)
I could have picked up a De Walt bag at Ganahls on sale today, but... they have not a clue what you do with those pouches and the hammer loop is tight for a tack hammer. Put em back. Got a bunch of DeWalt bits and such for $10.The ToolBear
"Never met a man who couldn't teach me something." Anon.
Ohhh boy do I hear ya.
Our Mikey is like that, no real pouch or bags just a body in my way.
I and Dale stuff crap ina 5 gal bucket to haul up via rope and Clamps, then we have our CLC or similar bags, that we haul up on rope, then we have our rigs strapped on, bags, fall arrest, etc. Climb the 5 tiers of scaffold...
BUT! I found a surplus store that sells ARMY/NAVY stuff for a pittance..I mean a 4 clip holder for a M16 with the top cut off holds both my snips and a riveter, and 2 emtyies for tongs or gutter crimpers. 5 bucks!
I set up a whole rig for just gutter tear out and reline, with belt for less than 50 bucks..no lie.
Shop surplus, get creative..you win.
Spheramid Enterprises Architectural Woodworks
I have irriatable Vowel syndrome.
I have a couple of really sweet canvas riggers bags with leather bottoms that i use that way sometimes--one is set up with all my sheet metal snips and hand brakes etc.--- i should go back to using that--it stays put on roof jack boards ok( i usually use 2x10 or 2x12.
buckets never work for me--won't stay put on a roof above 4/12. I used to occasionall clip one to a chimney tv ant strap---but often the chimney ain't handy.
mouth of the riggers bag doesn't open quite wide enough for me----mebbe if I got the heat gun out of it it would work ok though.
stephen
You gotta check out Millers line of bags, nuthin fancy wise but the removeability is nice. My fall arrest harness is rigged that way, but my main gear is a differnt set up.
I got the Miller set from Orrsaftey.com ..yup, 400.00 bucks, but it is a good chance tha an OSHA fine exceeds that by ten fold.
Spheramid Enterprises Architectural Woodworks
I have irriatable Vowel syndrome.
Not leather but I thoroughly recommend these...
I bought theseBrown Bag Co. Tollrider GSR about 7 months ago, when they were brand new on the market. I can't vouch for how long they last like my old oxys ( so far so good though) but I can vouch for how comfertable, functional, and downright awesome thery are. GREAT value for money too. At $110-ish I am used to paying a lot more so was pretty sceptical at first.
Ballistic nylon with reinforced knife pocket and bag bottoms / corners. I cant imagine not having the cell phone pocket on the suspenders and the tool pockets are pretty well laid out. Everything seems natural. I wear my hammer on the front, so replaced the hammer loop with a hammer tacker holder. Gone are the days of sore hips or cut in shoulders. The gel foam seemed like a gimmick but is proving to be very comfertable. I also replaced the nylon belt supplied with a good leather belt .
p.s. I have no affiliation with the manufacturer.
View Image
Cool and Thank you, but lack of fall arrest, I'd be toast in OSHA's eyes.
I don't have to be harnessed as often as I should, but ONE FINE will bankrupt me.
Spheramid Enterprises Architectural Woodworks
I have irriatable Vowel syndrome.
Ah shoot sorry I was supposed to send that to all, and not you personally. Suspenders should never replace a harness, although Im sure people have tried!
Suspenders should never replace a harness, although Im sure people have tried!
Anyone done a good job of mounting bags on a fall harness? Looking for ideas. The ToolBear
"Never met a man who couldn't teach me something." Anon.
Talk to Sphere.********************************************************
"It is what we learn after we think we know it all, that counts."
John Wooden 1910-
Miller Revolution, snap on and off bags and accessories. PRICEY.
I got about 400 in mine. All together.
Spheramid Enterprises Architectural Woodworks
I have irriatable Vowel syndrome.
Miller Revolution, snap on and off bags and accessories. PRICEY.
I shall Google, even as I type... TNX.The ToolBear
"Never met a man who couldn't teach me something." Anon.
sphere,
i don't know if YOU can be fined--Grant maybe-but I don't know about you.
I certainley don't really want to pry into your arrangement( it aint my business to know-and you are all "big boys")-------- but if you are technically a sub--you might be able to declare yourself your companies "designated competent person"-who DOESN'T have to be harnessed.
my son has been screwing around with rock climbing and wall climbing at college---------------- think I am gonna see if he can set me up with something to clip on my occy belt-caribiner or something to clip my rope on.- more like SLIDE arrest than fall arrest.
i hate my miller harness set up with the white hot intensity of 1000 suns-!@#$%^ mother !@#$% gonad pinching hindrance.-but it would be nice to have something additional to stop my slide BEFORE I go over the edge.
i got the riggers bags with the leather bottom from duluth Trading company years ago. I think they are discontinued now,as i never see 'em in catalogues anymore.
Stephen
"designated COMPETENT person.." LMAO..that AIN'T me..har har.
I still don't need the hassels from OSHA no matter who gets stuck holding the bag. Ain't worth it. Plus, I like not dieing froma a fall..LOL
Spheramid Enterprises Architectural Woodworks
I have irriatable Vowel syndrome.
dying from a fall probably's not all that bad, as long as it's quick
It's being permanently disabled that would suck
being trapped in my own helpless body is the worst thing I can imagine
shep,
my dad has been trapped in his own body by a stroke for about 12 years---what-ever you imagine-it's worse.
Stephen
So sorry to hear that
I started in the 60s with my dad and always worked with old guys, Therofore lumberyard cloth apron, hammer holder on belt wood ruler, worked framing we all wore that, One day i went on a big union job they said i must not be a carpenter i did not look like one, But i did have overalls withbuilt in pouches that made me look official, So i went and bought some leather ones, By the way i was the last man kept on that job, Now my boy walks around with custom bags loaded down with 50lbs of tools my back cant take that, im back to the lumberyard pouch and the un carpenter look again, I did buy one of those shop aprons that cover your chest that make you look like a cabinet maker, Im gonna try that look
I have worn a set of McRose leather custom pro triple longs for about 7 months, and I used to wear a right hander Occidental 5080 DB 6 pouch leather set. I switched over to McRose because he does custom work. The Oxy belt was plain leather 3", the McRose is the sheepskin 2.75" but 5" broad in the back, tape left. The McRose belt is definitely more comfortable, does not stink from sweat, and breaks in faster than the Occy, because the McRose leather is a slightly thinner, and McRose cuts the belt with a curve in them so that they more easily conform to one's waist. The leather is pretty good overall, but I think not quite as tough as the Oxy leather. McRose puts more stitching and more rivets, but the worksmanship is not as perfectly regular as Occidental. Also Occidental rivets seem to be better quality than McRose, though again McRose's greater quantity seems to balance things out. The McRose tape holder is too small for a Fat Max but if you use small 25 or 30' tapes you should be ok. McRose puts his side hammer loop at a slight angle so that your handle angles back away from your knee, definitely a good detail. McRose also puts some interesting bells and whistles like a pocket hidden between the left main and middle pouch that you can slide a cats paw or whatever into. Overall I give McRose a clear edge for comfort, since it breaks in in two weeks instead of a year, and a small edge for intuitive carpenter friendly design, while Occidental seems to be somewhat more durable, though both should take a pretty good beating. McRose will also customize in considerable detail if you know exactly what you want and are willing to pay more, he's a former carpenter so he is good at custom belt work. If you go McRose, I recommend the sheepskin lined broad back belt- it is very nice, my lower back is a little bad but I load up a lot of gear, fasteners and am surprisingly comfortable.
Hi
Thanks for your honest detailled opinion. you had some great pointers & info that I was hoping to get out of this post. I have ordered a McRose so will let you know what I think about it!
Maybe we should have a oxcy vs McRose Poll???
Yeah I think Dennis' custom leather work is the strong point of McRose so I will be interested to see how things turn out for you. McRose doesn't have the great widespread reputation Occidental does, but I know I was pleasantly surprised at the details and unexpected extras on the bags. At any rate I think McRose should be considered seriously alongside Occidental at the top of the US leather toolbelt business and anyone interested in a custom leather rig should consider mcrose.
I would agree. Good Advice!
Have you heard of the Diamondback tool belts/pouches? They are not leather, and I don't own one, but any number of people around here have said they are the best of the best.
They will customize anything you want, including left handed sets.
http://toolbelts.com/products.php?load=1
If the Occidental bags did not work for you, you might browse through the CLC site, another high quality maker of belts and pouches:
http://www.clccustomleathercraft.com/index.htm
********************************************************
"It is what we learn after we think we know it all, that counts."
John Wooden 1910-
Occidental makes them in both right and left handing, in leather and fabric.
<bestbelt.com/product/tool-bags/5018-tool-bag.html>
Pick the bag you like and look for the LH model number: XXXXX LH
I have their Stronghold adjustable framer for framing and Oxy Lights for trim. Like the cordura bags better in the rain.
The ToolBear
"Never met a man who couldn't teach me something." Anon.
I'm in New Zealand....no Occy bags here atall.
Someone from this forum kindly sent me a set with suspenders. I got 2 of the same bag. One in left hand and one in right.
I am a lefty and it suits me perfectly.
I am also very impressed with the quality and daily use. The Occy padded suspenders are priceless. No more sore back at the end of the day.
Not an exponent of the DILLIGAF system.
I am also very impressed with the quality and daily use. The Occy padded suspenders are priceless. No more sore back at the end of the day.
Their high end suspenders are superb. All through the '90s I was wearing those $15 clip on suspenders. Always tugging at them as they were never quite right.
Bought the Oxy suspenders. Problem solved. In fact, I bought a bunch of the extra suspender loops and put them on all my bags. Six belts and one set of suspenders. Works out well. The ToolBear
"Never met a man who couldn't teach me something." Anon.