*
We have digital Wirsbo thermostats run by 24VAC controlling our RFH. Need a couple slab sensing thermostats. Wirsbo only has set-point controllers, which don’t look near as nice as a thermostat. Looked on every web site I can find and called every company recommended, and can’t find a slab-sensing 24VAC digital thermostat for hydronic RFH. What gives? Found slab-sensing for electric RFH, but they have 110V outputs. Anyone know a source for these or have an explanation on why they don’t exist? Thanks.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
The recipe for linoleum hasn't changed much in nearly 170 years, yet it's still one of the greenest floors money can buy.
Featured Video
Builder’s Advocate: An Interview With ViewrailHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
*
This is a question that would be replied in fast order at The Wall.
Good bunch of folks who are very helpful in all matters hydronics.
http://www.heatinghelp.com/wall_forum.cfm
You do have to keep an eye on it because the forum topics turn over at a fast pace and there isn't an archive.
And it's not the most user friendly setup compared to this site.
I would duplicate your post at The Wall.
*Thanks Alan. I tried and keep getting this error:Error Diagnostic InformationError processing CFFILEError attempting to save uploaded file to path 'E:wwwheatinghelpimages..' Access is denied. (error 5)The error occurred while processing an element with a general identifier of (CFFILE), occupying document position (80:6) to (83:30) in the template file E:WWWHEATINGHELPWALL_THREADREPLY.CFMThe specific sequence of files included or processed is:E:WWWHEATINGHELPWALL_THREADREPLY.CFM ÊÊÊÊ .Date/Time: 03/13/01 10:29:11Browser: Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC)Remote Address: 24.18.45.189HTTP Referer: http://www.heatinghelp.com/wall_threadReply.cfm?forumID=1&ItemID=0Template: E:wwwheatinghelpwall_threadReply.cfm
*http://www.heatinghelp.comand work your way to The Wall.
*Sorry, Alan, I meant I got that message when I clicked the button to submit the question. I could get there and read ok. But I couldn't submit...
*Hmmmm....it may be a cookies thing, which I don't fully understand.You have to enable cookies I believe.Not much help, I know.Do try to go to the home page by manually typing in the url I gave you.Click to The Wall and then use the "start a new thread" button.
*Jim: Try this link http://www.danfoss.ca/catalog/heating/eicontrol/oj.htmThis is for their Canadian Site, but they should offer something similar in the US.
*You can email our U.S. manager [email protected]...he'd be happy to help you out.To get a back ground check on our company go to http://www.danfoss.com.Robert BeanNorth American ManagerEngineered Control PanelsDanfoss Inc.
*
We have digital Wirsbo thermostats run by 24VAC controlling our RFH. Need a couple slab sensing thermostats. Wirsbo only has set-point controllers, which don't look near as nice as a thermostat. Looked on every web site I can find and called every company recommended, and can't find a slab-sensing 24VAC digital thermostat for hydronic RFH. What gives? Found slab-sensing for electric RFH, but they have 110V outputs. Anyone know a source for these or have an explanation on why they don't exist? Thanks.