I can’t seem to figure out how to reply to “manroot” who gave a response to me on a concrete counter top question. If you’re out there:
no, for some reason, we did NOT allow the concrete to cure the 3 weeks. Do you know the procedure in remedying the situation now? How do you go about stripping the surface? And are you saying to etch the surface after stripping it? Any and all help/suggestions are welcomed. Thanks! Dietra
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Learn more about the benefits and compliance details for the DOE's new water heater energy-efficiency standards.
Featured Video
Video: Build a Fireplace, Brick by BrickHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
Dietra,
On the left side of the forum screen, you'll see a drop-down box that says "with Unread Msgs". click the little down arrow at the right side of the drop-down box and you will see "with Unread Msgs 'To:Me'". Click on that and then click "Go".
SamT
Manroot's message is here. http://forums.taunton.com/tp-breaktime/messages/?msg=34117.2
I found it with the Advanced Search button near the top of the frame on the left side of the screen. I entered
concrete weeks
in the search box, specified that I wanted messages containing all the words, and asked for the newest message to be displayed first.
If the message you're looking for is only a few days old, another way to find it is to select All in the "Show discussions ..." menu, or if you remember which folder the message was in, click on the folder name, which was General Discussion in this case. If you click on a folder name and don't see your message in the list, go to the bottom of the left hand frame, and a few lines up from the bottom you will see "Next 50" and a right arrow. Click on that and you will get the next older batch of messages.
Sam T's advice would work to get you to the right thread if anyone had posted a message after the ones you had already read. The way I read your message, you had already read Manroot's reply, and since no one has posted to that thread since Manroot (at the time I'm writing this), the "Unread Messages "To Me:" wouldn't be much help.