Replies

1. 
   Piffin | Oct 12, 2009 12:16am | #1

   no, but I'll bump the thread back up

    

    

   Welcome to the
   Taunton University of Knowledge FHB Campus at Breaktime.
    where ...
   Excellence is its own reward!

2. 
   mike_maines | Oct 12, 2009 01:39am | #2

   You might be thinking of Gary Katz's table: http://www.garymkatz.com/ChartsDrawings/tom-c_assembly-table.htm

   which is a copy of one from Eurekazone: http://eurekazone.com/products/detail/smarttable.html

   Or you might be thinking of John Carroll's knockdown shop: https://www.finehomebuilding.com/how-to/articles/creating-a-knock-down-shop.aspx?ac=ts&ra=fp.

   If none of those are what you're looking for, can you remember anything else about the article or table?

1. 
   JonPatrick | Oct 12, 2009 01:53am | #3

   Thanks foe the reply Mike.

   No, It was nothing as fancy as the Katz job. It was closer to a 4x8 wood pallet that you would set on horses.

1. 
   DanH | Oct 12, 2009 04:30am | #4

   I think that would get the SPCA after you.
   As I stood before the gates I realized that I never want to be as certain about anything as were the people who built this place. --Rabbi Sheila Peltz, on her visit to Auschwitz

3. 
   MikeSmith | Oct 12, 2009 04:42am | #5

   EZ Guide work table ?

   Mike Hussein Smith Rhode Island : Design / Build / Repair / Restore
4. 
   AaronRosenthal | Oct 12, 2009 06:21am | #6

   Joe Fusco has a youtube video out there with his Festool saw ....

   Quality repairs for your home.

   AaronR Construction
   Vancouver, Canada

    

5. 
   AitchKay | Oct 12, 2009 03:38pm | #7

   Sphere and I both use similar tables.

   Check out:

   124830.20

   and,

   124830.23

   AitchKay